Table 5: Pin Descriptions
Symbol Type Description
PS[9:0] Input Primary southbound data, positive lines.
PS#[9:0] Input Primary southbound data, negative lines.
SCK Input System clock input, positive line.
SCK# Input System clock input, negative line.
SCL Input Serial presence-detect (SPD) EEPROM clock input.
SS[9:0] Input Secondary southbound data, positive lines.
SS#[9:0] Input Secondary southbound data, negative lines.
PN[13:0] Output Primary northbound data, positive lines.
PN#[13:0] Output Primary northbound data, negative lines.
SN[13:0] Output Secondary northbound data, positive lines.
SN#[13:0] Output Secondary northbound data, negative lines.
SA[2:0] I/O SPD address inputs, also used to select the FBDIMM number in the AMB.
SDA I/O SPD data input/output.
RESET# Supply AMB reset signal.
V
CC
Supply AMB core power and AMB channel interface power (1.5V).
V
DD
Supply DRAM power and AMB DRAM I/O power (1.8V).
V
TT
Supply DRAM clock, command, and address termination power (V
DD
/2).
V
DDSPD
Supply SPD/AMB SMBus power (3.3V).
V
SS
Supply Ground.
M_TEST – The M_TEST pin provides an external connection for testing the margin of V
REF
, which is pro-
duced by a voltage divider on the module. It is not intended to be used in normal system op-
eration and must not be connected (DNU) in a system. This test pin may have other features
on future card designs and will be included in this specification at that time.
DNU – Do not use.
NC – No connect: These pins are not connected on the module.
8GB (x72, QR) 240-Pin DDR2 SDRAM FBDIMM
Pin Assignments and Descriptions
PDF: 09005aef840ecabe
hts72c1gx72fz.pdf - Rev. B 4/14 EN
4
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2010 Micron Technology, Inc. All rights reserved.