45.0 ± 0.5
(1.772 ± .020)
65.0 ± 0.2
(2.559 ± .008)
77.5
(3.052)
MAX.
0.5
(.020)
0.6
(.024)
3.7 ± 0.2
(.146 ± .008)
5.4 ± 0.2
(.213 ± .008)
2.3 ± 0.2
(.091 ± .008)
1.2 ± .05
(.047 ± .002)
1.8
(.071)
2 PLCS.
8.0
(.315)
4.0 +0/-0.1
(.157 +0/-.004)
6.0 ± 0.2
(.157 ± .008)
6.8
(.268)
12.5
(.492)
5.0
(.197)
5.0
(.197)
2 1 2' 1' 3' 3
5.0
(.197)
2.0
(.079)
HOLES
6 PLCS.
0.3
(.012)
R
M3 2 PLCS.
10.0 ± 0.3
(.394 ± .012)
L ± 0.5
(L ± .020)
38.7 ± 0.5
(1.524 ± .020)
13.0
(.512)
MAX.
20.0
(.787)
30.0
(1.181)
Features
■ High grade, long life
■ Single and dual gang
■ Assortment of resistance tapers
■ Tracking error within ±3 dB
■ 45, 60 and 100 mm sizes
■ Wide operating temperature range
■ T-bar lever option
PTS Series High Grade Slide Potentiometer
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
Electrical Characteristics
Standard Resistance Range
....................... 1K ohms to 1 megohm
Standard Resistance Tolerance ... ±20 %
End Resistance ...................1 ohm max.
Insulation Resistance @ 500 VDC
............................. 100 megohms min.
Dielectric Withstanding Voltage
............................................1000 VAC
Tracking Error ............................... ±3 dB
Standard Taper .................. Linear, Audio
Power Rating
Linear .....................................0.5 watt
Audio ....................................0.25 watt
Slider Noise .........................60 mV max.
Environmental Characteristics
Operational Life ..............100,000 cycles
TR Shift .................................... ±15 %
Operating Temperature Range
................................. -10 °C to +55 °C
Resistance to Solder Heat ............. ±5 %
Mechanical Characteristics
Mechanical Travel ........ Length ±0.5 mm
Operating Force .............................60 gf
Stop Strength .........................5 kgf min.
Shaft Axial Force .................. 10 kgf min.
Shaft Wobble .. 2(2 x L/25) mm p-p max.
Soldering Condition
Manual ...........300 °C ±5 °C for 3 sec.
Wave ..............260 °C ±5 °C for 5 sec.
Wash .....................Not recommended
Product Dimensions
45 mm Length of Travel
Lever End Syle “A”
DIMENSIONS:
MM
(INCHES)
Standard Resistance Table
Resistance Resistance
(Ohms) Code
1,000 102
2,000 202
5,000 502
10,000 103
20,000 203
50,000 503
100,000 104
200,000 204
500,000 504
1,000,000 105
Lever
Length
15.0
(.591)
20.0
(.787)
How To Order
PTS 45 - 0 2 L - 103 B2
Model Number
Designator
PTS = High Grade Slide
Potentiometer
Length of Travel
45 = 45 mm
60 = 60 mm
01 = 100 mm
Lever End Style/Length
0 = Lever End Style “A” / 15 mm
1 = Lever End Style “T” / 8.2 mm
2 = Lever End Style “A” / 20 mm
No. of Gangs
1 = Single Gang
2 = Dual Gang
Mounting Type
L = Solder Lugs
P = PC Pins
Resistance Code
(See Standard Resistance Table)
Resistance Taper (See Taper Charts)
Taper Series followed by Curve Number
*RoHS COMPLIANT
