DS9093A/F/N
2 of 3
DESCRIPTION
The DS9093F plastic snap-in fob offers the simplest way to mount an iButton for appli
only momentary contact. The fob can be attached to a key rin
cations that require
g for carrying. Do not apply solvents or
adhesives to this fob. This might affect the mechanical strength and reliability.
The DS9093N angled fob is an alternate way to mount an iButton for application
momentary contact. Due to the d
s that require only
ifferent mounting technique, the DS9093N can be used with the F5
MicroCan only. The i
Button is inserted into this fob by press-fitting. For permanent mount, the iButton
as about the same size as the DS9093N and can be
used with the F5 MicroCan only. The i
can be locked by a DS9093RA Lock Ring.
The DS9093A is very similar to the DS9093N. It h
Button is inserted by press-fitting the flange of the MicroCan into
the cavity of the fob. In contrast to the DS9093N, no additional parts are needed for permanent mounting.
The DS9093A is available in black, blue, green, red, and yellow.
