3210194 Datasheet 3210194 | P1-P3

https://www.phoenixcontact.com/pi/products/3210194

08/21/2018Page1/6

Disconnect terminal block-PT 2,5-QUATTRO-TGB-3210194

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Disconnect terminal block, nom. voltage:400 V, nominal current:16 A, connection method: Push-in

connection, cross section:0.14 mm²-4 mm², AWG:26-12, length:92.2 mm, width:5.2 mm, color:gray,

mounting: NS 35/7,5, NS 35/15, nom. voltage:400 V

Why buy this product

The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free

wiring of conductors with ferrules or solid conductors

The compact design and front connection enable wiring in a confined space

In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection

Tested for railway applications

Key Commercial Data

Packing unit 50 STK

GTIN

GTIN 4046356693974

Technical data

General

Note

The max. load current must not be exceeded by the total current of all

connected conductors.Current and voltage are determined by the plug

used.

Number of levels 1

Number of connections 4

Potentials 1

Nominal cross section 2.5 mm²

Color gray

Insulating material PA

Flammability rating according to UL 94 V0

Area of application Railway industry

Machine building

https://www.phoenixcontact.com/pi/products/3210194

08/21/2018Page2/6

Disconnect terminal block-PT 2,5-QUATTRO-TGB-3210194

Technical data

General

Plant engineering

Rated surge voltage 6 kV

Degree of pollution 3

Overvoltage category III

Insulating material group I

Maximum power dissipation for nominal condition 0.77 W

Maximum load current 16 A (with 4 mm² conductor cross section)

Nominal current I

16 A

Nominal voltage U

400 V

Open side panel Yes

Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11

Back of the hand protection guaranteed

Finger protection guaranteed

Result of surge voltage test Test passed

Surge voltage test setpoint 7.3 kV

Result of power-frequency withstand voltage test Test passed

Power frequency withstand voltage setpoint 1.89 kV

Result of the test for mechanical stability of terminal points (5 x

conductor connection)

Test passed

Result of bending test Test passed

Bending test rotation speed 10 rpm

Bending test turns 135

Bending test conductor cross section/weight 0.14 mm² / 0.2 kg

2.5 mm² / 0.7 kg

4 mm² / 0.9 kg

Tensile test result Test passed

Conductor cross section tensile test 0.14 mm²

Tractive force setpoint 10 N

Conductor cross section tensile test 2.5 mm²

Tractive force setpoint 50 N

Conductor cross section tensile test 4 mm²

Tractive force setpoint 60 N

Result of tight fit on support Test passed

Tight fit on carrier NS 35

Setpoint 1 N

Result of voltage-drop test Test passed

Result of temperature-rise test Test passed

Short circuit stability result Test passed

Conductor cross section short circuit testing 2.5 mm²

Short-time current 0.3 kA

Result of thermal test Test passed

https://www.phoenixcontact.com/pi/products/3210194

08/21/2018Page3/6

Disconnect terminal block-PT 2,5-QUATTRO-TGB-3210194

Technical data

General

Ageing test for screwless modular terminal block temperature cycles 192

Proof of thermal characteristics (needle flame) effective duration 30 s

Result of aging test Test passed

Oscillation, broadband noise test result Test passed

Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03

Test spectrum Service life test category 2, bogie-mounted

Test frequency

= 5 Hz to f

= 250 Hz

ASD level

6.12 (m/s

)

/Hz

Acceleration 3.12 g

Test duration per axis 5 h

Test directions X-, Y- and Z-axis

Shock test result Test passed

Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03

Shock form Half-sine

Acceleration 30g

Shock duration 18 ms

Number of shocks per direction 3

Test directions X-, Y- and Z-axis (pos. and neg.)

Relative insulation material temperature index (Elec., UL 746 B) 130 °C

Temperature index of insulation material (DIN EN 60216-1 (VDE

0304-21))

130 °C

Static insulating material application in cold -60 °C

Behavior in fire for rail vehicles (DIN 5510-2) Test passed

Flame test method (DIN EN 60695-11-10) V0

Oxygen index (DIN EN ISO 4589-2) >32 %

NF F16-101, NF F10-102 Class I 2

NF F16-101, NF F10-102 Class F 2

Surface flammability NFPA 130 (ASTM E 162) passed

Specific optical density of smoke NFPA 130 (ASTM E 662) passed

Smoke gas toxicity NFPA 130 (SMP 800C) passed

Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3

Dimensions

Width 5.2 mm

End cover width 2.2 mm

Length 92.2 mm

Height 35.2 mm

P1-P3 P4-P6

3210194

Mfr. #:

Buy 3210194

Manufacturer:

Phoenix Contact

Description:

DIN Rail Terminal Blocks PT 2 5-QUATTRO-TGB

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

3210194