ITEM # DESCRIPTION
07515 Foot Ground, Heel, 2 megohm resistor, RTG: 10
6
- 10
7
Ohms
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: www.desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
DRAWING NUMBER
07515
DATE:
8/07
FOOT GROUND, HEEL, 3-LAYER, NON-MARRING, 2 MEG
Description:
The 07515 Foot Grounder provides a continuous ground path between an
operator and a properly grounded ESD protected floor. These foot grounders
are designed for use on standard shoes. They can be easily adjusted to fit the individual
wearer. These foot grounders are made from non-marring three layer grey reversible
static dissipative rubber with a non-carbon tear resistant inner scrim layer. This unit
includes a blue tab with carbon suffused fibers and a snap-loc system for quick and easy
fastening and removal. Full elastic strap provides maximum "flexing" comfort. This heel
grounder is UL listed. The product has been tested to ESD STM 97.2 - Floor materials
and Footwear Voltage Measurement in Combination with a Person. It is a suitable ESD
footwear component in Flooring - Footwear System when used as the primary grounding
method (<3.5 x 10
7
ohms per ESD STM 97.1 Floor Materials and Footwear-Resistance
Measurement in Combination with a Person.)
Components:
A. 0.060" thick rubber, 1.50" wide, 3-layer reversible non-smudge static dissipative
rubber cup.
B. 3/8" wide, 30" long blue polyester tab contains electrically conductive carbon
suffused fibers.
C. 3/4" wide, blue elastic material for comfort.
D. 1/4 watt, 2 megohm black molded external
resistor.
E. Black snap-loc fastening system allows for quick
and easy fastening and removal.
listed for safety and date coded.
Tab to cup resistance:
10
6
- 10
7
Ohms @ 100 volts
E
B
C
D
A
Detail of snap-loc fastener
DESCO
Our UL listed foot grounders are rated at 250 VAC. It is not recommended to use them where exposure
to line voltages above 250 VAC is possible. Caution: The foot grounder is for ESD control. It will not
reduce or increase your risk of receiving electric shock when using or working on electrical equipment.
Note:
Two heel straps are recommended for reliable grounding and ESD
protection, providing ground when one foot is off the floor.
Operator is grounded when foot is in contact with grounded dissipative or
conductive flooring.
Desco recommends the use of foot ground tester item No. 19252, 19253,
98280/98273, or 98280/98254.
For additional information on the use and maintenance of foot grounders
please ask for Technical Bulletins TB-2020, TB-2040, TB-3000.
Item 07515 is UL listed.
© 2007 DESCO INDUSTRIES INC.
Employee Owned
Made in America
90P1
LISTED
