Zero-Drift, Single-Supply, Rail-to-Rail I/O
Quad, Operational Amplifier
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2010 Analog Devices, Inc. All rights reserved.
FEATURES
Supports defense and aerospace applications (AQEC
standard)
Military temperature range ( −55°C to +125°C)
Controlled manufacturing baseline
One assembly/test site
One fabrication site
Enhanced product change notification
Qualification data available on request
Low offset voltage: 1 µV
Input offset drift: 0.005 µV/°C
Rail-to-rail input and output swing
5 V/2.7 V single-supply operation
High gain: 145 dB typical
CMRR: 140 dB typical
PSRR: 130 dB typical
Ultralow input bias current: 10 pA typical
Low supply current: 750 µA per op amp
Overload recovery time: 50 µs
No external capacitors required
APPLICATIONS
Temperature sensors
Pressure sensors
Precision current sensing
Strain gage amplifiers
GENERAL DESCRIPTION
This amplifier has ultralow offset, drift, and bias current. The
AD8574-EP is a quad amplifier, featuring rail-to-rail input and
output swings. It is guaranteed to operate from 2.7 V to 5 V
single supply.
PIN CONFIGURATIONS
OUT A
1
–IN A
2
+IN A
3
V+
4
+IN B
5
OUT D
–IN D
+IN D
V–
+IN C
14
13
12
11
10
–IN B
6
OUT B
7
–IN C
OUT C
9
8
AD8574-EP
TOP VIEW
(Not to Scale)
09302-003
Figure 1. 14-Lead TSSOP (RU Suffix)
The AD8574-EP provides benefits previously found only in
expensive auto-zeroing or chopper-stabilized amplifiers. Using
a patented spread-spectrum, auto-zero technique, the AD8574
eliminates the intermodulation effects from interaction of the
chopping function with the signal frequency in ac applications.
With an offset voltage of only 1 µV and drift of 0.005 µV/°C, the
AD8574-EP is perfectly suited for applications where error
sources must be minimized.
The AD8574-EP is specified for the military temperature range
(−55°C to +125°C). The AD8574-EP quad amplifier is available in
a 14-lead TSSOP package.
Additional applications and technical information is available in
the AD8571/AD8572/AD8574 data sheets.
