1 of 2 072308
DESCRIPTION
The DS9094F iButton PCB Clip holds an iButton and
connects to a printed circuit board. By deflecting the
spring clip in the molded housing, an i
Button can be
inserted and extracted without special tools. If
reverse insertion is attempted, the beveled edge on
the housing prevents contact.
FEATURES
Low-cost holder for F5 size iButton
(see DS9094SM for F3 holder)
Printed circuit board mount
Contacts are gold plated
Flammability rating: UL94V-O
Two versions:
− DS9094F for F5 size i
Button
− DS9094FS for surface mounting F5 size
i
Button
ORDERING INFORMATION
PART TEMP RANGE PIN-PACKAGE
DS9094F+ -40°C to 85°C
1
Through-hole mount
F5 can
DS9094FS+ -40°C to 85°C
2
Surface mount F5 can
1
NOTE: Wave- or hand-solder only; do not reflow.
2
NOTE: Hand-solder only; do not reflow.
+ Denotes lead-free compliance.
INSERTION OF iButton
DAT A
GROUND
Recommended Pad Si ze
DS9094FS
Bot t om sur f ace of met al cont act s t o
be 0 t o 0. 13 bel ow t he seat i ng pl ane
of t he pl ast i c suppor t s at al l poi nt s
Recommended Hol e Si ze
DS9094F
0. 97 DI A.
FI NI SHED
HOLE 2PL.
All dimensions in millimeters.
DS9094F
i
Button PCB Clip
www.maxim-ic.com
iButton is a registered trademark of Maxim Integrated Products, Inc.
