© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 06/29/18
Surface Mount Fuses
Thin Film
®
Fuse > 470 Series >1206 Fast Acting
Packaging
Packaging Option Packaging Specification Quantity
Quantity &
Packaging Code
Reel Size
8mm Tape and Reel EIA-RS-481-1 1500 DR N/A
Dimensions
Part Numbering System
3.65
(.143”)
1.185
(.047”)
1.28
(.050”)
2.05
(.081”)
Recommended Pad Layout
LH
3.302
[0.13]
1.168
[0.046]
1.575
[0.062]
0470 002. D R SNP
Series
Packaging Code
R = Tape and Reel
Amp Code*
Refer to Amp Code column of
Electrical Characteristics Table
Quantity Code
D = 1500 pieces
Termination Code
Materials
Body: Epoxy Resin
Terminations: Cu/Ni/Sn (100%
Pb-free)
Product Marking Body: Current Rating
Operating Temperature –55ºC to +125ºC
Solderability MIL-STD-202
Insulation Resistance
(after opening)
IEC 60127-4 (0.1Mohm Min)
Product Characteristics
Thermal Shock
MIL-STD-202, Method 107, Test
Condition B, 5 cycles, -65°C to
125°C, 15 minutes @ each extreme
Mechanical Shock
MIL-STD-202, Method 213B,
Test Condition I: De-energized.
100G’s peak amplitude, sawtooth
wave 6ms duration, 3 cycles
XYZ+xyz = 18 shocks
Vibration
MIL-STD-202, Method 201: 0.03”
amplitude, 10-55 Hz in 1 min. 2 hrs.
each XYZ = 6hrs (10- 55 Hz)
Moisture Resistance
MIL-STD-202, Method 106, 10 cycles
Condition A
Salt Spray
MIL-STD-202, Method 101,
Test Condition B (48 hrs)
Resistance to Soldering
Heat
Method 210, Test Condition B
(10 sec at 260°C)
Part Marking System
Amp Code Marking Code
.500 LF
0 01. LH
1.25 LJ
01. 5 LK
002. LN
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.
Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.