PRODUCT SPECIFICATION
1.27mm PITCH SLIM-GRID
®
SHROUDED HEADERS
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC
3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS
The following documents form a part of this specification to the extended specified herewith. In the
event of conflict between the requirements of this specification and the product drawing, the
product drawing shall take precedence
Reference Product Specifications
781200001 1.27mm Pitch SLIM-GRID
®
Receptacle
4.0 RATINGS
4.1 VOLTAGE
125 Volts Vac
4.2 CURRENT
4.3 Amps per Pole
4.3 TEMPERATURE
Operating: - 55°C to + 105°C
Non-operating: - 55°C to + 105°C
Safety rating serves as a guideline for safe use to customer. The performance of the current rating
varies at mating level. The connector must be evaluated in the customer end product for safe and
proper us
5.1 ELECTRICAL REQUIREMENTS
Contact
Resistance
(LLCR)
Mate connectors: apply a maximum
voltage of 20 mV and a current of
100 mA.
(EIA-364-23)
Note: Wire resistance and traces shall be
removed from the measured value.
30 milliohms
[MAXIMUM]
[initial]
Mated & unmount connectors: apply a
voltage of 500 VDC between adjacent
terminals and between terminals to
ground.
(EIA-364-21)
Dielectric
Withstanding
Voltage
Mated & unmount connectors: apply a
voltage of 1000VAC for 1 minute between
adjacent terminals and between terminals
to ground.
(EIA-364-20)
No breakdown;
Current leakage < 5 mA