–1–
ASCTB260E 201408-T
TYPES
1. Sockets (HC sockets)
Notes: 1. Use the hold-down clip that is shipped with the terminal socket or socket.
2. DIN rail terminal sockets conform to UL/C-UL and TÜV, as standard. Sockets conform to UL and CSA, as standard.
3. In order to prevent breakage and disfiguring, the screw tightening torque for the terminal socket should be within the range of 0.49 to 0.69 N·m (5 to 7 kgf·cm).
4. When attaching directly to a chassis, please use an M4 × 10 metric coarse screw thread, a spring washer, and a hexagonal nut.
5. For S1DX/S1DXM timer, use the leaf holding clip (Part No. ADX18012).
2. Terminal sockets (HJ terminal sockets)
*1 When using 2/4-pole common type, please use within a range that dose not exceed the max. continuous current (5A)
3. Terminal sockets (HC terminal sockets)
Note: 1. For rating of HC terminal sockets, please refer to page 52.
RATING
Specifications (Sockets and terminal sockets)
Note: When using 2-pole of HJ relay (7A rating) on a 4 Form C socket and terminal socket that is 2/4-pole common, please use within a range that does not exceed the max.
continuous current (5A).
ACCESSORIES
HJ RELAYS
(Sockets and DIN rail
terminal sockets)
Type No. of poles Product name Part No.
Standard packing
Carton Case
Plug-in socket
2-pole HC2-socket (for HJ relay) HC2-SS-K-H105
10 pcs. 100 pcs.
2/4-pole (common) HC4-socket (for HJ relay) HC4-SS-K-H105
PC board socket
2-pole HC2-PC board socket (for HJ relay) HC2-PS-K-H105
2/4-pole (common) HC4-PC board socket (for HJ relay) HC4-PS-K-H105
Type No. of poles Product name Part No.
Standard packing Applicable HJ relay (Plug-in type)
Carton Case 2 Form C 4 Form C
For
DIN rail
2-pole
HJ2 terminal socket HJ2-SFD
10 pcs. 100 pcs.
●
HJ2 terminal socket (Finger protect type) HJ2-SFD-S ●
2/4-pole (common)
HJ4 terminal socket HJ4-SFD ▲*1 ●
HJ4 terminal socket (Finger protect type) HJ4-SFD-S ▲*1 ●
Type No. of poles Product name Part No.
Standard packing Applicable HJ relay (Plug-in type)
Carton Case 2 Form C 4 Form C
For
DIN rail
2-pole HC2-slim type DIN terminal socket HC2-SFD-S 20 pcs. 100 pcs. ●
2/3-pole (common) HC3-DIN terminal socket HC3-SFD-K
5 pcs. 50 pcs.
●
1/2/4-pole (common) HC vertical terminal socket HC4-TSF-K ●●
Item Performance
Type
For HC2/HJ
Plug in
terminal socket
For HC2/HJ
PC board
socket
HJ2
terminal socket
HJ2
terminal socket
(Finger protect
type)
For HC4/HJ
Plug in
terminal socket
For HC4/HJ
PC board
socket
HJ4
terminal socket
HJ4
terminal socket
(Finger protect
type)
Contact arrangement 2 Form C (2-pole) 4 Form C (2/4-pole common)
Max. continuous current
(Ambient temperature: -40/-50
to +70°C -40/-58 to +158°F)
7A 7A 7A 7A 5A 5A 5A 5A
Breakdown
voltage
(Initial)
Between open
contacts
2, 000 Vrms for 1 min. (Detection current: 10mA)
Between contact
sets
Between contact
and coil
Initial insulation resistance 100 MΩ between each terminal (500V DC)