USB 2.0 Hi-Speed 3-Port Hub Controller Optimized for Portable Applications
Datasheet
DS00001715A-page 46
2014 Microchip Technology Inc.
9.3 Power Consumption
This section details the power consumption of the device as measured during various modes of
operation. Power dissipation is determined by temperature, supply voltage, and external source/sink
requirements.
9.3.1 Operational / Unconfigured
9.3.2 Suspend / Standby
9.3.2.1 Single Supply
The following table details the device power consumption when configured with a single VBAT supply
For additional information on power connections, refer to Chapter 4, "Power Connections," on page 17.
Note: Typical values measured with VBAT = 4.2V. Maximum values measured with VBAT = 5.5V.
Table 9.1 Operational/Unconfigured Power Consumption
TYPICAL (mA) MAXIMUM (mA)
VBAT VDDCOREREG VBAT VDDCOREREG
HS Host / 1 HSIC Device 15 30 15 35
HS Host / 1 HS Devices 25 30 30 35
HS Host / 2 HS Devices 40 40 45 45
HS Host / 1 HSIC, 2 HS Devices 20 35 25 40
HS Host / 1 FS Device 15 25 20 30
HS Host / 2 FS Devices 20 30 20 35
HS Host / 1HSIC, 2 FS Devices 20 35 25 40
Unconfigured 10 20 - -
Table 9.2 Single Supply Suspend/Standby Power Consumption
MODE SYMBOL TYPICAL @ 25
o
CCOMMERCIAL
MAX
INDUSTRIAL
MAX
UNIT
Suspend I
VBAT
300 1200 1650 uA
Standby I
VBAT
0.4 2.0 2.4 uA