Dimensions are shown: mm (inch)
Dimensions subject to change
www.ittcannon.com
B-39
Tactile Switches
B
KSA & KSL Series
Sealed Tact Switch
Features/Benefits
• Designed for automatic or
manual insertion
• Cambered terminals to ensure
self retention
• Top or side actuated
• Washable option available
• Large choice of caps
Typical Applications
• Automotive
• Industrial
• Telecommunication networks
How To Order
Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired
option from each category and place it in the appropriate box.
Ground Terminal
0 Without
Insertion
M Manual (bulk packaging)
A Automatic (tube packaging)
V Vertical
K S
Contact Material
1 Silver contacts
3 Gold contacts
Actuator Type
A Short hard plastic
L Long hard plastic
Operation Force
2 1.3 N (130 grams), 100,000 operations
3 1.3 N (130 grams), 1,000,000 operations
4 3 N (300 grams), 100,000 operations
5 5 N (500 grams), 100,000 operations
9 3 N (300 grams), 500,000 operations
Sealing
0 Sealed against flux
1 Totally sealed
Specification
CONTACT ARRANGEMENT: SPST, N.O.
DOUBLE OVERMOLDING ON TERMINAL
MEMBRANE SEALING
TERMINALS: PC pins, ground pin optional
Mechanical
NOTE: Part numbers listed above do not represent all possible configurations.For
information on specific and custom switches, consult Customer Service Center.
Electrical Silver Gold
MAXIMUM POWER: 1 VA 0.2 VA
MAXIMUM VOLTAGE: 50 VDC 50 VDC
MINIMUM VOLTAGE: 20 mV 20 mV
MAXIMUM CURRENT: 50 mA 10 mA
MINIMUM CURRENT: 1 mA 1 mA
DIELECTRIC STRENGTH: 300 Vrms
CONTACT RESISTANCE: < 50 mΩ
INSULATION RESISTANCE (100 V): > 10
11
Ω
BOUNCE TIME: < 1 ms
Environmental Silver Gold
OPERATING TEMPERATURE: -40˚C to 90˚C -40˚C to 125˚C
STORAGE TEMPERATURE: -40˚C to 90˚C -55˚C to 125˚C
Process
Wave soldering EIA-RS448-2
Packaging
Can be delivered in tubes of 65 pieces for automatic insertion or
in boxes of 500 pieces for manual insertion (250 pieces for KSL,
KSLV, KSAV).
Actuation force Operating life Travel to
Type N (grams) (operations) make
KSA0M211 1.3 (130) 500,000 0,5 ± 0,2
KSA0M311 1.3 (130) 1,000,000 0,5 ± 0,2
KSA0M411 3.0 (300) 100,000 0,6 ± 0,2
KSA0M511 5.0 (500) 100,000 0,7 ± 0,2
KSA0M911 3.0 (300) 500,000 0,6 ± 0,2
KSL0M211 1.3 (130) 500,000 0,5 ± 0,2
KSL0M311 1.3 (130) 1,000,000 0,5 ± 0,2
KSL0M411 3.0 (300) 100,000 0,6 ± 0,2
KSL0M511 5.0 (500) 100,000 0,7 ± 0,2
KSL0M911 3.0 (300) 500,000 0,6 ± 0,2
B T N K 0
Button Style
K01 10 mm square snap-on
K02 ø8 mm round snap-on
K03 8,5 x 3,8 mm single floating
K04 18,5 x 3,8 mm double floating
K05 5 mm square
Button Color
10 Dark gray
20 Light gray
30 Yellow
40 Red
50 Green
60 Blue
70 Gray-blue
80 Ivory
90 Black
SWITCH
BUTTONS
K06 10 x 2,5 mm snap-on handle
K07 5 mm square
K08 9,9 x 5 mm rectangular
K09 ø6,2 mm round
Buttons must be ordered separately and will be supplied in bulk.
