ELS-321SURWA/S530-A3 Datasheet ELS-321SURWA/S530-A3 | P4-P6

DATASHEET

Display  Through-hole

ELS-321SURWA/S530-A3

4

www.everlight.com

Package Dimension

& Internal Circuit Diagram

Note: Tolerances unless mentioned ±0.25mm. Unit = mm

DATASHEET

Display  Through-hole

ELS-321SURWA/S530-A3

5

www.everlight.com

Packing Materials

Label Explanation

CPN: Customer’s Product Number

P/N: Product Number

QTY: Packing Quantity

CAT: Luminous Intensity Rank

HUE: Reference

REF: Reference

LOT No: Lot Number

REFERENCE: Volume Label code

Packing Process

Application Restrictions

1. Specification described in this document. Above specification may be changed without notice. EVERLIGHT will

reserve authority on material change for above specification.

2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in

these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the

product which does not comply with the absolute maximum ratings and the instructions included in these

specification sheets.

3. These specification sheets include materials protected under copyright of EVERLIGHT Corporation. Please don’t

reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.

26 PCS/Tube

88Tubes/Box

4 Boxes/Carton

S321SURWA/S530-A3

DATASHEET

Display  Through-hole

ELS-321SURWA/S530-A3

6

www.everlight.com

4. ESD (Electrostatic Discharge)

 The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.

When handling the products, the following measures against electrostatic discharge are strongly

recommended:

Eliminating the charge

Grounded wrist strap, ESD footwear, clothes, and floors

Grounded workstation equipment and tools

ESD table/shelf mat made of conductive materials

 Proper grounding is required for all devices, equipment, and machinery used in product assembly.

Surge protection should be considered when designing of commercial products.

 If tools or equipment contain insulating materials such as glass or plastic,

the following measures against electrostatic discharge are strongly recommended:

Dissipating static charge with conductive materials

Preventing charge generation with moisture

Neutralizing the charge with ionizers.

ELS-321SURWA/S530-A3

ELS-321SURWA/S530-A3

Products related to this Datasheet