Limit and Enclosed Switches OP Series
Enclosed Switches
A110Honeywell1 Sensing and Control11-800-537-6945 USA1F1-815-235-6847 International11-800-737-3360 Canada
CONDUIT SEALING PACKETS
Catalog Listing
Packet Cable O.D. Inches
2PA6 .400N – .435N
2PA16 .435N – .470N
2PA1 .530N – .570N
(See page A99 for description.)
REPLACEMENT PARTS
In addition to the items shown below, these
replaceable internal levers are available:
33PA2-OP for OP-AR, OP-AR20 and OP-CR; and
33PA3-OP for OP-AR50.
Catalog Listing
Replacement Part Numbers
Switch Listing Switching Unit Acutator Springs
OP-AR BZ-2R-P4 6PA6-OP 33PA7-EX
OPA-AR BA-2R-P4 6PA6-OP 33PA6-EX
OPD-AR DT-2R4-A7 6PA6-OP 33PA6-EX
OP-AR30 BZ-2R-P4 6PA6-OP 33PA5-EX
OPD-AR30 DT-2R711-A7 6PA6-OP 33PA5-EX
OP-AR16 BZ-2RW88-P5 6PA6-OP —
OP-AR20 BZ-2R-P4 † 33PA7-EX
OP-Q BZ-2R-P4 8PA7-OP —
OPA-Q BA-2R-P4 ——
OPD-Q DT-2R-A7 ——
OP-CR BZ-2R-P4 6PA131-EX 33PA7-EX
OP-AR50 BZ-2R-P4 6PA134-OP 33PA7-EX
† Levers for OP-AR20 are on pages A108 and A109.
MOUNTING BRACKETS
15PA85-EX is used for top, bottom, back or end
mounting. It is furnished with each switch, except
OP-AR16 and OP-AR62.
15AP86-EX is ordered separately for top mounting
of plunger switches.
(Switches may also be direct mounted using 10-
32 NF screws.)
MOUNTING DIMENSIONS (For reference only)
ROLLER LEVER WITHOUT LEVER
Note: For additional mounting dimensions refer to EX drawings
on page A125 (cross roller lever) and page A126 (plunger and
manually actuated switches) which are dimensionally identical
to their OP counterparts.