User's Manual
R20UT2451EJ0100 Rev.1.00 Page 1 of 7
Dec 20, 2012
R0E510Y16LVB00
Low voltage OCD Board for RL78/G10 Groups
1. Overview
R0E510Y16LVB00 is a debug board for R5F10Y16ASP, R5F10Y14ASP in RL78/G10 groups, which is enabled to effective debug
of hardware and software on low voltage user system.
This product is used with E1 emulator. And a box connector of 2.45mm pitch is needed to connecting user system.
Also refer to E1/E20 Emulator Additional Document for User's Manual (Notes on Connecting RL78), when you use this product.
Figure 1 System Configuration
2. Specifications
Table 1 shows the functional specifications of this product.
Table 1 Specifications of this product
Item Specification
Target MCU R5F10Y16ASP, R5F10Y14ASP
Support Emulator E1 emulator (E20 emulator is not supported )
Target I/F 8510-4500 : 10-pin type connecter, Sumitomo 3M Limited
Power supply for this product Emulator or Target system*
Operating voltage 2.0V to 5.0V
Operating temperature 5 to 35°C (No condensation)
Storage temperature -15 to 60°C (No condensation)
Dimensions 60mm * 60mm (Does not include projection) Refer to figure2.
Weight 16g
Note* If the user system power supply is turned on be before starting debugger, this product uses 150mA current
from user system.
USB interface cable
User interface cable
Host machine
User system
RE510Y16LVB00
E1 emulator
* Do not mount target device on user system.
If target device is mounted, the signals are shorted
between this product and target device on user system.
R20UT2451EJ0100
Rev.1.00
Dec 20, 2012
