Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
02/11/2015www.crouzet.com
Inertia of measuring chain : 3.4 g.cm2
a = constant voltage controller with Rs (resistance in series) = 0 b = constant voltage controller with Rs (resistance in series) = R motor c = constant voltage
controller with Rs (resistance in series) = 2R motor d = constant voltage controller with Rs (resistance in series) = 3R motor The measurements are made with full stepping, 2-phases energised.
Inertia of measuring chain : 3.4 g.cm2
a = constant voltage controller with Rs (resistance in series) = 0 b = constant voltage controller with Rs (resistance in series) = R motor c = constant voltage
controller with Rs (resistance in series) = 2R motor d = constant voltage controller with Rs (resistance in series) = 3R motor The measurements are made with full stepping, 2-phases energised.
N
o
Legend
RPM
Max. stopping
-starting curves
Curves
2 phases -Max. stopping-starting and operating curves at I constant (PBL 3717) for 2 (motor) phases 9 Ω. Holding torque 150 mN.m. Current per phase 0.53 A
N
o
Legend
RPM
Max. stopping
-starting curves
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
02/11/2015www.crouzet.com
N.B.
Measurement conditions :
Tam = 25 °C, motor cold
Energisation sequence for clockwise rotation : (viewed shaft end)
Max. operating curves
Curves
Max. stopping-starting frequency curves as a function of the external inertia load at zero antagonistic torque. Tests at constant U.
N
o
Legend
2 phases
4 phases
Connections
2 phases
N
o
Legend
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
