Expand menu
Hello, Sign in
My Account
0
Cart
Home
Products
Sensors
Semiconductors
Passive Components
Connectors
Power
Electromechanical
Optoelectronics
Circuit Protection
Integrated Circuits - ICs
Main Products
Manufacturers
Blog
Services
About OMO
About Us
Contact Us
Check Stock
NCP170AMX250GEVB
P1-P1
11/10/15
1
www.onsemi.com
Test Procedure for the NCP1
70A
MX
25
0GEVB Evaluation Board
Test procedure:
1.Check the position of jumper and correct this if necesary in acordance with the picture above.
2. Connect the test setup as shown Figure above
3. Appy an input voltage
Vin = 3.5 V
4. Appy Iout = 0mA load.
5. Check that Vout is
2.5 V +/-
1%
.
6. Increase Iout up to
0.15 A
7. Check that Vout is
2.5 V +/-
1%
.
7. Increase Vin up to
5.5 V
and decrease the load in accordance with
SOA
8. Power down the Load
9. Power down the Vcc
10. End of test
P1-P1
NCP170AMX250GEVB
Mfr. #:
Buy NCP170AMX250GEVB
Manufacturer:
ON Semiconductor
Description:
EVAL BOARD NCP170AMX250G
Lifecycle:
New from this manufacturer.
Delivery:
DHL
FedEx
Ups
TNT
EMS
Payment:
T/T
Paypal
Visa
MoneyGram
Western
Union
Products related to this Datasheet
NCP170AMX250GEVB