OUE8A420Y1

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.2 07/09
Page 1 of 8
Ultraviolet (UV) Metal Can LED
OUE8A Series
The OUE8A Series offers an energy-efficient hermetic TO-46 metal can packaged UV LED source providing a
uniform optical light pattern, high current pulse capability, ESD protection and a long operating lifespan. Devices
have a 18
o
typical emission angle with peak wavelengths from 375 nm to 425 nm. In order to meet critical
wavelength requirements of the industry, the OUE8A Series is divided into groups each with a total wavelength
range of only 5 nm. Each wavelength range is subdivided into optical power output ranges from a minimum of 1.8
mW to over 17.0 mW based on power out specifications listed below.
Features:
Peak Wavelengths from 380 nm to 425 nm
Uniform Optical Light Pattern
High Pulse Current
Hermetic TO-46 Metal Can Package
RoHs Compliant—No Mercury
ESD Protected
Applications:
Adhesive-Ink Photo Catalyst Curing
Currency / Passport Validation
Spectroscopy
Forensic
Medical
RoHs
Warnings and Handling Instructions
UV-LEDs emit invisible ultraviolet radiation when in operation,
which may be harmful to eyes or skin, even for brief periods.
Do NOT look directly into the UV-LED during operation.
Be sure that you and all persons in the vicinity wear
adequate “UV” Safety protection for eyes and skin.
If you incorporate a UV-LED into a product,
be sure to provide appropriate WARNING labels.
ESD Level 8,000 V
Part Number Guide
OUE8 A XXX Y 1
Optek UV TO-46 LED Series Packaging
1 – Tray Pack
Power Output (mW) - A through J
Sequence Numbers (AZ) Wavelength (nm) Identifier
Part Number Emission
Angle
Peak Wavelength (nm)
I
F
= 100 mA
Optical Power Output (mW)
I
F
= 100 mA
18
Range Minimum Maximum
OUE8A385Y1 380 to 385 1.8 8.1
OUE8A390Y1 385 to 390 1.8 8.1
OUE8A395Y1 390 to 395 3.1 9.8
OUE8A400Y1 395 to 400 5.8 13.4
OUE8A410Y1 405 to 410 5.8 13.4
OUE8A425Y1 420 to 425 7.3 15.4
OUE8A380Y1 375 to 380 1.8 8.1
OUE8A405Y1 400 to 405 5.8 13.4
OUE8A415Y1 410 to 415 7.3 15.4
OUE8A420Y1 415 to 420 7.3 15.4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.2 07/09
Page 2 of 8
Ultraviolet (UV) Metal Can LED
OUE8A Series
Absolute Maximum Ratings (T
A
=25°C unless otherwise noted)
Storage Temperature Range -40
o
C to +125
o
C
Allowable Reverse Current (I
R
)
85 mA
Continuous Forward Current 100 mA
Peak Pulsed Forward Current (Pulse Width 100 usec @ 10% duty cycle) 1.6 A
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron] 260° C
(1)
Power Dissipation 370 mW
Operating Temperature Range -40
o
C to +85
o
C
Notes:
1. RMA flux is recommended. Duration can be extended to 10 seconds maximum when wave soldering.
Electrical & Optical Characteristics (T
A
= 25°C unless otherwise noted)
SYMBO
L
PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
V
F
Forward Voltage 3.0 3.3 3.7
V
ΔV
F/
ΔT
V
F
Temperature Co-efficient -4.8
mV/
o
C
∆λ
P
Spectral Half Width - 12 -
nm
∆λ
P
/T
Peak Spectral Shift with Temperature - 0.035 -
nm/°C
ΔP
o/
ΔT
Power Output Drop Temperature Co-efficient - -0.2 -
%/
o
C
θ
HP
Emission Angle at Half Power Points - 18 -
Degree I
F
= 20 mA
I
F
= 100 mA
0.520
[13.20]
Pin 2
Pin 1
Pin 1 Cathode
Pin 2 Anode
Dimensions are in inches [ mm]
Part Number
Date Code
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.2 07/09
Page 3 of 8
Ultraviolet (UV) Metal Can LED
OUE8A Series
Standard Optical Power Bins
Devices are sorted to Optical Power Out (mW) as shown below.
Unless designated, orders may be filled with any or all bins contained.
Optical Power Out (mW)
I
F
= 100 mA @ 25
o
C
Bin Minimum Bin Maximum
OUE8AxxxA 0.5 2.0
OUE8AxxxB 1.8 3.5
OUE8AxxxC 3.1 4.9
OUE8AxxxD 4.5 6.5
OUE8AxxxE 5.8 8.1
OUE8AxxxF 7.3 9.8
OUE8AxxxG 8.8 11.5
OUE8AxxxH 10.4 13.4
OUE8AxxxI 12.1 15.4
OUE8AxxxJ 13.9 17.6
Power Bin
Identification
Where xxx = Part Number Wavelength (nm) on page 1
Parts for a specific Power Bin are subject to availability.
T
A
= 25°C
I
F
= 20 mA
18 degrees Typical
Normalized Spectral Intensity vs. Angular Displacement
Spatial Intensity Distribution

OUE8A420Y1

Mfr. #:
Manufacturer:
Optek / TT Electronics
Description:
Standard LEDs - Through Hole Ultraviolet 420nm Hermedic Metal Can
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union