OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

V4-1/2-0-SP

P1-P2
Versafit V4
Very-thin-wall, highly flame-retardant,
imperial-sized heat-shrinkable tubing
Versafit V4 heat-shrinkable tubing is
a cost-effective, environmentally
friendly choice for many commercial
applications. Versafit V4 tubing is a
very thin-wall version of Versafit,
a specially formulated polyolefin
with low recovery temperature,
excellent flexibility, and high flame-
retardance (VW-1).
Versafit V4 tubing is typically applied
where space savings is important,
offering the ability to pack components
more closely than is possible with
standard tubings. Versafit V4 tubing
can shrink more than twice as fast
as standard products. This rapid
shrinking may be important in the
prevention of overheating of
temperature-sensitive components.
Unlike other typical flame-retardant
tubings, Versafit V4 tubing is free of
polybrominated biphenyls (PBBs)
and polybrominated biphenyl oxides
(PBBOs). In Europe, these chemicals
are classified as environmentally
hazardous substances.
Versafit V4 products are UL-recognized
at 125°C, 300 V, and CSA-certified at
125°C, 150 V, with UL VW-1 and
CSA OFT flame-retardancy ratings.
Temperature rating
Full recovery temperature: 90°C
Continuous operating temperature: –45°C to 125°C
Specifications*
Type Raychem UL CSA
Versafit V4 RW-3023 E35586 VW-1 LR31929 VW-1
*When ordering, always specify latest issue.
Dimensions (millimeters/inches)
Inside diameter Wall thickness
D (min.) d (max.) W
Size Expanded as supplied Recovered after heating Recovered after heating**
3/64 1.2 0.046 0.6 0.023 0.30 ± 0.05 0.012 ± 0.002
1/16 1.6 0.063 0.8 0.031 0.30 ± 0.05 0.012 ± 0.002
3/32 2.4 0.093 1.2 0.046 0.30 ± 0.05 0.012 ± 0.002
1/8 3.2 0.125 1.6 0.062 0.33 ± 0.05 0.013 ± 0.002
3/16 4.8 0.187 2.4 0.093 0.33 ± 0.05 0.013 ± 0.002
1/4 6.4 0.250 3.2 0.125 0.36 ± 0.05 0.014 ± 0.002
3/8 9.5 0.375 4.8 0.187 0.36 ± 0.05 0.014 ± 0.002
1/2 12.7 0.500 6.4 0.250 0.36 ± 0.05 0.014 ± 0.002
3/4 19.1 0.750 9.5 0.375 0.46 ± 0.08 0.017 ± 0.003
1 25.4 1.000 12.7 0.500 0.51 ± 0.08 0.020 ± 0.003
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering information
Colors Standard Black
Nonstandard Other colors available on request.
Size selection Always order the largest size that will shrink snugly over the component being covered.
Standard packaging On spools
Ordering description Specify product name, size, and color; for example, V4 1/16-0 (0=Black).
®
Fully recovered after heating
D
W
d
Expanded as supplied
PBBs
PBBOs
Tyco Electronics Corporation
300 Constitution Drive Faraday Road 3816 Noborito, Tama-ku Asia Pacific Headquarters
Menlo Park, CA 94025-1164 Dorcan, Swindon, SN3 5HH Kawasaki, Kanagawa 214-8533 26 Ang Mo Kio, Industrial Park 2
USA United Kingdom Japan Singapore 569507
Tel:(800) 926-2425 (US & Canada) Tel: +44 1793 528171 Tel: +81 44 900 5102 Tel: +65 4866 151
Tel:+1 (650) 361-3860 (All other countries)
Users should independently evaluate the suitability of the product for their application.
For more information about this product visit www.tycoelectronics.com
All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes
no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporation’s only obligations are those in the Standard Terms and
Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the
product. Tyco Electronics Corporation’s Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing
without notification to the Buyer which do not affect compliance with any applicable specification.
Specification values
Property Unit Requirement Method of test
Physical Dimensions mm (inches) See reverse ASTM D 2671
Longitudinal change
ASTM D 2671 percent +1, –15 ASTM D 2671
UL 224 percent +3, –3 UL 224
Eccentricity (recovered) percent 30 maximum ASTM D 2671
Tensile strength psi (MPa) 1500 (10.3) minimum ASTM D 2671
Ultimate elongation percent 200 minimum ASTM D 2671
Secant modulus psi
(MPa) 2.5 x 10
4
(172) maximum ASTM D 2671
(as supplied)
Low-temperature flexibility No cracking UL 224
(1 hour at –30°C/–22°F)
Heat shock No cracking UL 224
(4 hours at 250°C/482°F)
Heat aging UL 224
(7 days at 158°C/
316°F)
Followed by tests for:
Tensile strength psi
(MPa) 70% minimum UL 224
of unaged specimens
Ultimate elongation percent 100 minimum UL 224
Flexibility No cracking UL 224
Dielectric withstand seconds 60 minimum ASTM D 2671
at 2500 V
Dielectric breakdown volts 50% minimum ASTM D 2671
of unaged specimens
Dielectric strength volts/mil (kV/mm) 500 (19.7) minimum ASTM D 2671
Restricted shrinkage Pass UL 224
Electrical Dielectric withstand seconds 60 minimum ASTM D 2671
at 2500 V
Dielectric strength volts/mil (kV/mm) 500 (19.7) minimum ASTM D 2671
Volume resistivity ohm-cm 10
14
minimum ASTM D 2671
Chemical Corrosive effect No corrosion ASTM D 2671
(7 days at 158°C/316°F)
Copper stability No brittleness, glazing, ASTM D 2671
(7 days at 158°C/
316°F) cracking, or severe
discoloration of tubing.
No pitting or blackening of copper.
Followed by test for:
Ultimate elongation percent 100 minimum ASTM D 2671
Flammability Pass UL 224, VW-1
Water absorption (recovered) percent 0.5 maximum ASTM D 2671
(24 hours at 23°C/73°F)
Fungus resistance ISO 846
Method B
Followed by tests for:
Tensile strength psi (MPa) 1500 (10.3) minimum ASTM D 2671
Ultimate elongation percent 200 minimum ASTM D 2671
Dielectric strength volts/mil (kV/mm) 500 (19.7) minimum ASTM D 2671
Note: Consult RW-3023 for specific details about test procedures.
Versafit and Raychem are trademarks of Tyco Electronics Corporation.
© 1995, 2002 Tyco Electronics Corporation Printed in USA 1654073 Revised 04/04
P1-P2

V4-1/2-0-SP

Mfr. #:
Buy V4-1/2-0-SP
Manufacturer:
Raychem / TE Connectivity
Description:
Heat Shrink Tubing and Sleeves HS-TBG 12.7MM BK PRICE PER FT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet