5962-0822701HYA

ACPL-570XL, ACPL-573XL, ACPL-177XL, 5962-08227
Hermetically Sealed 3.3V, Low I
F
, Wide V
CC
, High Gain Optocouplers
Data Sheet
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Description
These devices are single, dual, and quad channel, hermeti-
cally sealed optocoup lers. The products are capable of
operation and storage over the full military temperature
range and can be purchased as either standard product
or with full MIL-PRF-38534 Class Level H or K testing or
from DLA Drawing 5962-08227. All devices are manufac-
tured and tested on a MIL-PRF-38534 certi ed line and are
included in the DLA Quali ed Products Database Supple-
mental Information Sheets QPDSIS-38534 as Hybrid Mi-
crocircuits.
Each channel contains a GaAsP light emitting diode which
is optically coupled to an integrated high gain photon
detector. The high gain output stage features an open
collector output providing both lower saturation voltage
and higher signaling speed than possible with conven-
tional photo-Darling ton optocouplers.
The supply voltage can be operated as low as 3.0 V without
adversely a ecting the parametric performance.
These devices have a 300% minimum CTR at an input
current of only 0.5 mA making them ideal for use in low
input current applications such as MOS, CMOS, low power
logic interfaces or line receivers.
The connection of a 0.1
F bypass capacitor between V
CC
and GND is recommended.
Features
Low power consumption
3.3V Supply voltages
Dual marked with device part number and DLA
drawing number
Manufactured and tested on a MIL-PRF-38534 Certi ed
Line
QPDSIS-38534, Class H and K
Three hermetically sealed package con gurations
Performance guaranteed over full military temperature
range: -55°C to +125°C
Low input current requirement: 0.5 mA
High current transfer ratio: 1500% typical @ I
F
= 0.5 mA
Low output saturation voltage: 0.11 V typical
1500 Vdc withstand test voltage
HCPL-4701/31, -070A/31 function compatibility
Applications
Military and aerospace
High reliability systems
Telephone ring detection
Microprocessor system interface
Transportation, medical, and life critical systems
Isolated input line receiver
EIA RS-232-C line receiver
Voltage level shifting
Isolated input line receiver
Isolated output line driver
Logic ground isolation
Harsh industrial environments
Current loop receiver
System test equipment isolation
Process control input/output isolation
2
Functional Diagram
Multiple Channel Devices Available
Package styles for these parts are 8 and 16 pin DIP through
hole (case outlines P and E respec tively). Devices may be
purchased with a variety of lead bend and plating options.
See Selection Guide table for details. Standard Military
Drawing (SMD) parts are available for each package and
lead style.
Because the same electrical die (emitters and detectors)
are used for each channel of each device listed in this
data sheet, absolute maximum ratings, recommended
operating conditions, electrical speci cations, and perfor-
mance characteristics shown in the  gures are similar for
all parts except as noted. Additionally, the same package
assembly processes and materials are used in all devices.
These similarities justify the use of a common data base for
die related reliability.
Truth Table
(Positive Logic)
Input Output
On (H) L
O (L) H
7
5
6
8
2
3
4
1
Selection Guide – Package Styles and Lead Con guration Options
Package 16 Pin DIP 8 Pin DIP 8 Pin DIP
Lead Style Through Hole Through Hole Through Hole
Channels 4 1 2
Common Channel Wiring VCC, GND None VCC, GND
Avago Part # & Options
Commercial ACPL-1770L ACPL-5700L ACPL-5730L
MIL-PRF-38534, Class H ACPL-1772L ACPL-5701L ACPL-5731L
MIL-PRF-38534, Class K ACPL-177KL ACPL-570KL ACPL-573KL
Standard Lead Finish Gold Plate Gold Plate Gold Plate
Solder Dipped* Option -200 Option -200 Option -200
Butt Cut/Gold Plate Option -100 Option -100 Option -100
Gull Wing/Soldered* Option -300 Option -300 Option -300
Class H SMD Part #
Prescript for all below 5962- 5962- 5962-
Gold Plate 0822703HEC 0822701HPC 0822702HPC
Solder Dipped* 0822703HEA 0822701HPA 0822702HPA
Butt Cut/Gold Plate 0822703HUC 0822701HYC 0822702HYC
Butt Cut/Soldered* 0822703HUA 0822701HYA 0822702HYA
Gull Wing/Soldered* 0822703HTA 0822701HXA 0822702HXA
Class K SMD Part #
Prescript for all below 5962- 5962- 5962-
Gold Plate 0822703KEC 0822701KPC 0822702KPC
Solder Dipped* 0822703KEA 0822701KPA 0822702KPA
Butt Cut/Gold Plate 0822703KUC 0822701KYC 0822702KYC
Butt Cut/Soldered* 0822703KUA 0822701KYA 0822702KYA
Gull Wing/Soldered* 0822703KTA 0822701KXA 0822702KXA
* Solder contains lead.
3
Outline Drawings
16 Pin DIP Through Hole, 4 Channels
Device Marking
Functional Diagrams
16 pin DIP 8 pin DIP 8 pin DIP
Through Hole Through Hole Through Hole
4 Channels 1 Channel 2 Channels
16
11
10
9
7
5
6
8
2
1
3
4
12
14
15
13
7
5
6
8
2
3
4
1
7
5
6
8
2
3
4
1
A QYYWWZ
XXXXXX
XXXXXXX
XXX XXX
50434
Avago LOGO
Avago P/N
DLA SMD*
DLA SMD*
PIN ONE/
ESD IDENT
COMPLIANCE INDICATOR,*
DATE CODE, SUFFIX (IF NEEDED)
COUNTRY OF MFR.
Avago CAGE CODE*
*QUALIFIED PARTS ONLY
t
8 Pin DIP Through Hole, 1 and 2 Channel
Note: Dimensions in Millimeters (Inches).
4.45 (0.175)
MAX.
20.06 (0.790)
20.83 (0.820)
0.51 (0.020)
MAX.
2.29 (0.090)
2.79 (0.110)
0.51 (0.020)
MIN.
0.89 (0.035)
1.65 (0.065)
8.13 (0.320)
MAX.
7.36 (0.290)
7.87 (0.310)
0.20 (0.008)
0.33 (0.013)
3.81 (0.150)
MIN.
ANODE
3
CATHODE
6
5
V
CC
V
O
I
CC
GND
I
O
I
F
2
+
V
F
8

5962-0822701HYA

Mfr. #:
Manufacturer:
Broadcom / Avago
Description:
Logic Output Optocouplers 3.3V 1CH 1500Vdc Hermetically sealed
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union