EAIST1608A1 Datasheet EAIST1608A1 | P7-P9

Data Sheet

0.8mm Height Flat Top Infrared LED

EAIST1608A1

7

www.everlightamericas.com

4. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3

seconds within once in less than the soldering iron capacity 25W. Leave two seconds and

more intervals, and do soldering of each terminal. Be careful because the damage of the

product is often started at the time of the hand solder.

5. Repairing

Repair should not be done after the LEDs have been soldered. When repairing is

unavoidable, a double-head soldering iron should be used (as below figure). It should be

confirmed beforehand whether the characteristics of the LEDs will or will not be damaged

by repairing.

Data Sheet

0.8mm Height Flat Top Infrared LED

EAIST1608A1

8

www.everlightamericas.com

Package Dimensions

Note: The tolerances unless mentioned are ±0.1, unit=mm.

Carrier Taping Dimensions: Loaded Quantity 3000PCS/Reel

Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

Data Sheet

0.8mm Height Flat Top Infrared LED

EAIST1608A1

9

www.everlightamericas.com

Label Form Specification

CPN: Customer’s Production Number

P/N : Production Number

QTY: Packing Quantity

CAT: Ranks

HUE: Peak Wavelength

REF: Reference

LOT No: Lot Number

Notes

1. Above specification may be changed without notice. Everlight Americas will reserve authority

on material change for above specification.

2. When using this product, please observe the absolute maximum ratings and the instructions for

using outlined in these specification sheets. Everlight Americas assumes no responsibility for

any damage resulting from use of the product which does not comply with the absolute

maximum ratings and the instructions included in these specification sheets.

3. These specification sheets include materials protected under copyright of Everlight Americas

corporation. Please don’t reproduce or cause anyone to reproduce them without Everlight

Americas’s consent.

EAIST1608A1

EAIST1608A1

Products related to this Datasheet