AS3710-BQFP

AS3710
High Current Power Management Unit for Portable Devices
Product Brief
www.austriamicrosystems.com 0.20 1 - 3
1 General Description
The AS3710 is a compact System PMU with integrated
battery charger and back light driver.
The device offers advanced power management func-
tions. All necessary ICs and peripherals in a battery
powered mobile device are supplied by the AS3710. It
features 3 DCDC buck converters as well as 8 low noise
LDOs. The different regulated supply voltages are pro-
grammable via the serial control interface. 4MHz opera-
tion with 1uH coils are reducing cost and PCB space.
The three step-up converter generate voltages for
e.g.the backlight, classD amplifier, USB host support or
LCD display supply. Both constant voltage (for e.g.
OLED supply) as well as constant current (white LED
backlight) operations with three current sinks are possi-
ble. An internal voltage protection is limiting the output
voltage in the case of external component failures.
AS3710 contains a linear or switching mode Li-Ion bat-
tery charger with constant current and constant voltage.
The maximum charging current is 1.5A. An integrated
battery switch and an optional external switch are sepa-
rating the battery during charging or whenever an exter-
nal power supply is present. With this switch it is also
possible to operate with no or deeply discharged batter-
ies. A programmable current limit can be used to control
the maximum current used from a USB supply. Addi-
tional features are a 30V OV protection and battery tem-
perature supervision.
The single supply voltage may vary from 2.7V to 5.5V.
2 Key Features
Power Management
Voltage Generation
3 DCDC step down regulators
- DVM (0.6V-3.3V;1x 1.2-1.5A, 2x 0.7-1A)
- 50uA quiescent current
- selectable switching frequency (2, 3 or 4MHz)
- 2A with combined DCDC 2 & 3
2 analog low noise LDOs, 6 digital LDOs
- 2x 1.2-3-3V, 6x 0.9-3.3V; 150-300mA
- 30uA quiescent current (low power mode)
1 ultra low power always on LDO 2.5V, 10mA
power supply supervision
4sec and 8sec emergency shut-down
stand-by function
HV Backlight Driver
3x step up with external transistor
voltage control mode and over-voltage protection
3 programmable current sinks (max. 40mA)
e.g. 500mA@5V; 40mA@50V
possible external PWM dimming input (DLS, CABC)
Battery Charger
prog. trickle charging (25-220mA)
prog. constant current charging (up to 1500mA)
prog. constant voltage charging (3.9V-4.25V)
charger time-out and temperature supervision
selectable current limitation for USB mode
integrated battery switch & ideal diode (linear mode)
external battery switch control (switching mode)
external 30V OV protection
General
Supervisor
automatic battery monitoring with interrupt genera-
tion and selectable warning level
automatic temperature monitoring with interrupt
generation and selectable warning and shutdown
levels
Real Time Clock
ultra low power 32kHz oscillator
sec and minute counter, auto wake-up
selectable alarm (seconds or minutes)
32kHz clock output to peripheral
<1uA total power consumption
4 General Purpose IOs
10bit general purpose ADC input
wake-up/sleep and DVM input
PWM (DLS, CABAC) dimming input
status output for: charger, low battery, power good
and step-up overcurrent
Q32k clock output
interrupt output
PWM output
step-up feedback input
www.austriamicrosystems.com 0.20 2 - 3
AS3710
Product Brief
OTP programmable BOOT Sequence
programmable regulator default voltages
programmable start-up sequence
General Purpose ADC
10bit resolution
several internal / external sources
- VUSB, VSUP, CHGIN, VBAT
- GPIOx, CURRx
- XOUT32K, SENSEN_SU1
- chip temperature
Figure 1. AS3710 Block Diagram
Control Interface
I2C control lines, including watchdog
Power-Up input
bidirectional reset, with selectable delay
ultra low power standby mode
Power-On Reset Circuit
Packaging
QFN56 7x7mm 0.4mm pitch
Application
Portable Media Players, Portable Navigation Devices,
E-Books, Mobile Internet Devices, Tablet PCs
www.austriamicrosystems.com 0.20 3 - 3
AS3710
Product Brief - Key Features
Copyright
Copyright © 20110.20, austriamicrosystems AG, Schloss Premstaetten, 8141 Unterpremstaetten, Austria-Europe.
Trademarks Registered ®. All rights reserved. The material herein may not be reproduced, adapted, merged, trans-
lated, stored, or used without the prior written consent of the copyright owner.
All products and companies mentioned are trademarks or registered trademarks of their respective companies.
Disclaimer
Devices sold by austriamicrosystems AG are covered by the warranty and patent indemnification provisions appearing
in its Term of Sale. austriamicrosystems AG makes no warranty, express, statutory, implied, or by description regarding
the information set forth herein or regarding the freedom of the described devices from patent infringement. austria-
microsystems AG reserves the right to change specifications and prices at any time and without notice. Therefore,
prior to designing this product into a system, it is necessary to check with austriamicrosystems AG for current informa-
tion. This product is intended for use in normal commercial applications. Applications requiring extended temperature
range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-
sustaining equipment are specifically not recommended without additional processing by austriamicrosystems AG for
each application. For shipments of less than 100 parts the manufacturing flow might show deviations from the standard
production flow, such as test flow or test location.
The information furnished here by austriamicrosystems AG is believed to be correct and accurate. However,
austriamicrosystems AG shall not be liable to recipient or any third party for any damages, including but not limited to
personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or
consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the tech-
nical data herein. No obligation or liability to recipient or any third party shall arise or flow out of
austriamicrosystems AG rendering of technical or other services.
Contact Information
Headquarters
austriamicrosystems AG
A-8141 Schloss Premstaetten, Austria
Tel: +43 (0) 3136 500 0
Fax: +43 (0) 3136 525 01
For Sales Offices, Distributors and Representatives, please visit:
http://www.austriamicrosystems.com/contact

AS3710-BQFP

Mfr. #:
Manufacturer:
ams
Description:
Power Management Specialized - PMIC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet