MAX3747A/MAX3747B
155Mbps to 3.2Gbps, Low-Power SFP
Limiting Amplifiers
2
Maxim Integrated
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(V
CC
= +2.97V to +3.63V, CML output load is 50Ω to V
CC
, T
A
= -40°C to +85°C. Typical values are at V
CC
= +3.3V and T
A
= +25°C,
unless otherwise specified.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Power-Supply Voltage (V
CC
) .................................-0.5V to +4.5V
Voltage at IN+, IN- ..........................(V
CC
- 2.4V) to (V
CC
+ 0.5V)
Voltage at DISABLE, LOS, TH, V
REF
..........-0.5V to (V
CC
+ 0.5V)
Current into LOS ...................................................-1mA to +9mA
Current into V
REF
..................................................................2mA
Differential Input Voltage (IN+ - IN-) .....................................2.5V
Continuous Current at CML Outputs
(OUT+, OUT-) ..............................................-25mA to +25mA
Continuous Power Dissipation (T
A
= +70°C)
10-Pin µMAX (derate 6.9mW/°C above +70°C) ...........552mW
Operating Junction Temperature Range (T
J
) .......-55°C to +150°C
Storage Ambient Temperature Range (T
S
)...........-55°C to +150°C
Lead Temperature (soldering, 10s)......................................+300°C
Soldering Temperature (reflow)............................................+260°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
POWER SUPPLY
M AX 3747A i ncl ud i ng the C M L outp ut cur r ent 36 41
M AX 3747B i ncl ud i ng the C M L outp ut cur r ent 38 43
MAX3747A excluding the CML output
current
18 24
Supply Current (Note 2) I
CC
MAX3747B excluding the CML output
current
20 26
mA
Power-Supply Noise Rejection PSNR f < 2MHz 30 dB
INPUT SPECIFICATION
Input Sensitivity V
IN-MIN
(Note 3) 4 mV
-
Input Overload V
IN-MAX
(Note 3) 1200 mV
-
OUTPUT SPECIFICATION
Output Resistance R
OUT
(Note 4) 42 50 58 Ω
Differential Output Return Loss DUT is powered on, f < 3GHz 15 dB
CML Differential Output Voltage
MAX3747A/MAX3747B
4mV
P-P
≤ V
IN
≤ 1200mV
P-P
600 800 1000 mV
-
Differential Output Signal When
Disabled
AC-coupled outputs, V
IN-MAX
applied to the
input (Note 4)
15 mV
-
Data-Output Transition Time 20% to 80% (Note 4) 70 120 ps
TRANSFER CHARACTERISTIC
K28.5 pattern at 3.2Gbps 13.2 19
PRBS 2
23
- 1 equivalent pattern at 2.7Gbps
(Note 6)
14 25
K28.5 pattern at 2.1Gbps 12 17
Deterministic Jitter (Notes 4, 5) DJ
P RBS 2
2 3
- 1 eq ui val ent p atter n at 155M b p s
(Note 6)
85 150
ps
-
Random Jitter V
IN
= 4mV
P-P
(Notes 4, 7) 3.5 5 ps
RMS