OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HMC410MS8GETR

P1-P3P4-P6
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE-BALANCED - SMT
4
HMC410MS8G / 410MS8GE
v02.0607
GaAs MMIC DOUBLE-BALANCED
HIGH IP3 MIXER, 9 - 15 GHz
OBSOLETE PRODUCT
Outline Drawing
Absolute Maximum Ratings
RF / IF Input +20 dBm
LO Drive +27 dBm
IF DC Current ±4 mA
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[3]
HMC410MS8G Low Stress Injection Molded Plastic Sn/Pb Solder
MSL1
[1]
H410
XXXX
HMC410MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
MSL1
[2]
H410
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE-BALANCED - SMT
5
HMC410MS8G / 410MS8GE
v02.0607
GaAs MMIC DOUBLE-BALANCED
HIGH IP3 MIXER, 9 - 15 GHz
OBSOLETE PRODUCT
Pin Number Function Description Interface Schematic
1, 8 GND
Pins and exposed ground slug must be
connected to RF ground.
2 LO
This pin is AC coupled & matched to 50 Ohms
from 9.0 to 15.0 GHz.
3, 4, 6 N/C Not connected.
5 IF
This pin is DC coupled. For applications not requiring
operation to DC this port should be DC blocked externally
using a series capacitor whose value has been chosen to pass
the necessary IF frequency range. For operation to DC, this
pin must not source/sink more than 4mA of current or die non-
funtcion and possible die failure will result.
7 RF
This pin is DC coupled & matched to 50 Ohms
from 9.0 to 15.0 GHz.
Pin Descriptions
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - SINGLE & DOUBLE-BALANCED - SMT
6
HMC410MS8G / 410MS8GE
v02.0607
GaAs MMIC DOUBLE-BALANCED
HIGH IP3 MIXER, 9 - 15 GHz
OBSOLETE PRODUCT
Evaluation PCB
The circuit board used in the nal application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
Item Description
J1 - J2 PCB Mount SMA RF Connector, SRI
J3 PCB Mount SMA Connector, Johnson
U1 HMC410MS8G / HMC410MS8GE
PCB
[2]
101650 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
List of Materials for Evaluation PCB 103350
[1]
P1-P3P4-P6

HMC410MS8GETR

Mfr. #:
Buy HMC410MS8GETR
Manufacturer:
Analog Devices / Hittite
Description:
RF Mixer hi IP3 DBL-BAL mix SMT 9 - 15 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet