www
.cherryswitches.com
Page 1 of 2, last update 2014-10-29, Specifications subject to change without notice.
Angle Posi
tion Sensors
A
N1 Sensors
Intrinsically Linear Angle Position Sensor
Descript
ion
The AN1 Series sensors are one-piece, intrinsically linear contact angle position sensors. The sensors operate through the use of
Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output
(ratiometric to the input voltage) corresponding to an angular rotation of the input shaft.
Patented intrinsically linear angle position sensor (ILAPS)
Magnet/sensor orientation provides linear output from 5° to
85° of rotation without the need for electrical compensation
Return spring provides resistance to CCW motion
Fully encapsulated electronics
RoHS compliant
IP67
Implement (fork lift, agricultural trailer hitch,
etc.) position sensing
Steer, throttle by wire
Gear selection
Zero-contact encoder alternative
Env
ironmental Specifications
1g RMS axial, 5g RMS horizontal, 8g RMS vertical; 20 Hz to 2 kHz
-40 °C to 125 °C (-40 °F to 257 °F)
-40 °C to 135 °C (-40 °F to 275 °F)
Electrical
Specifications
Output Voltage vs. Rotation Angle
0° to 5° : 10% of Input Voltage, 5° to 85°: ratiometric (linear from 10%
to 90% of Input Voltage), 85° to 120°: 90% of Input Voltage (see chart)
Mechanical Specifications
0.21 Nm (30 in oz) max with return spring
AN101101 Counter-clockwise Delphi Metri-pack 150
12162185
Delphi 12124075 Delphi 12162185
