1. General description
The TEA1713 integrates a Power Factor Corrector (PFC) controller and a controller for a
Half-Bridge resonant Converter (HBC) in a multi-chip IC. It provides the drive function for
the discrete MOSFET in an up-converter and for the two discrete power MOSFETs in a
resonant half-bridge configuration.
The efficient operation of the PFC is achieved by implementing functions such as
quasi-resonant operation at high power levels and quasi-resonant operation with valley
skipping at lower power levels. OverCurrent Protection (OCP), OverVoltage Protection
(OVP), and demagnetization sensing ensure safe operation under all conditions.
The HBC module is a is a high-voltage controller for a zero-voltage switching LLC
resonant converter. It contains a high-voltage level shift circuit and several protection
circuits including OCP, open-loop protection, capacitive mode protection and a general
purpose latched protection input.
The high-voltage chip is fabricated using a proprietary high-voltage Bipolar-CMOS-DMOS
power logic process that enables efficient direct start-up from the rectified universal mains
voltage. The low-voltage Silicon On Insulator (SOI) chip is used for accurate, high-speed
protection functions and control.
The topology of a PFC circuit and a resonant converter controlled by the TEA1713 is very
flexible, enabling it to be used in a broad range of applications with a wide mains voltage
range. Combining PFC and HBC controllers in a single IC makes the TEA1713 ideal for
controlling power supplies in LCD and plasma televisions.
Highly efficient and reliable power supplies providing over 100 W can be designed easily
using the TEA1713, with a minimum of external components.
TEA1713T
Resonant power supply control IC with PFC
Rev. 2 — 9 February 2011 Product data sheet
TEA1713T All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 2 — 9 February 2011 2 of 47
NXP Semiconductors
TEA1713T
Resonant power supply control IC with PFC
2. Features and benefits
2.1 General features
Integrated PFC and HBC controllers
Universal mains supply operation (70 V to 276 V (AC))
High level of integration resulting in a low external component count and a cost
effective design
Enable input (enable only PFC or both PFC and HBC controllers)
On-chip high-voltage start-up source
Stand-alone operation or IC supplied from external DC source
2.2 PFC controller features
Boundary mode operation with on-time control
Valley/zero voltage switching for minimum switching losses
Frequency limiting to reduce switching losses
Accurate boost voltage regulation
Burst mode switching with soft start and soft stop
2.3 HBC controller features
Integrated high-voltage level shifter
Adjustable minimum and maximum frequency
Maximum 500 kHz half-bridge switching frequency
Adaptive non-overlap time
Burst mode switching
2.4 Protection features
Safe restart mode for system fault conditions
General latched protection input for output overvoltage protection or external
temperature protection
Protection timer for time-out and restart
Overtemperature protection
Soft (re)start for both controllers
Undervoltage protection for mains (brownout), boost, IC supply and output voltage
Overcurrent regulation and protection for both controllers
Accurate overvoltage protection for boost voltage
Capacitive mode protection for HBC controller
3. Applications
LCD television
Plasma television
Adapters
TEA1713T All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 2 — 9 February 2011 3 of 47
NXP Semiconductors
TEA1713T
Resonant power supply control IC with PFC
4. Ordering information
5. Block diagram
Table 1. Ordering information
Type number Package
Name Description Version
TEA1713T SO24 plastic small outline package; 24 leads; body width 7.5 mm SOT137-1
Fig 1. Block diagram of TEA1713
High-side driver
LEVEL
SHIFTER
Low-side driver
SUPREG
SWITCH
CONTROL
BOOST
COMPENSATION
ADAPTIVE
NON-OVERLAP
SENSING
CAPACITIVE
MODE
SENSING
BURST
SENSING
PFC / HBC
OVERCURRENT
REGULATION
SENSING
OUTPUT
UNDERVOLTAGE
SENSING
OVERCURRENT
PROTECTION
SENSING
OUTPUT
OVERVOLTAGE
SENSING
SERIES
STABILIZER AND
SUPREG SENSING
SUPPLY
CONTROL
INTERNAL
SUPPLIES
OPEN-LOOP
SENSING
CONTROLLED
OSCILLATOR
FEEDBACK
INPUT
HIGH
FREQUENCY
SENSING
+
I-V
V-I
SUPHS
14
9
SUPREG
6
SUPIC
12
SUPHV
2
SNSMAINS
1
COMPPFC
7
3
4
23
GATEPFC
SNSAUXPFC
SNSCURPFC
RCPROT
24
SNSBOOST
13
21
20
19
15
10
17
8
5
GATEHS
HB
GATELS
PGND
SNSCURHBC
SNSOUT
SNSFB
CFMIN
18
SGND
22
SSHBC/EN
RFMAX
014aaa850
+1.83 V
+3.5 V
+1 V
1 V
+2.3 V
+0.5 V
0.5 V
+0.4 V
+1.0 V
4.1 V
7.7 V
6.4 V
HV START-UP
SOURCE
SUPPLY MODULE
PFC CONTROLLER
HBC CONTROLLER
TEA1713
HV START-UP
SELECTION
MAINS
COMPENSATION
ON-TIMER
OFF-TIME LIMIT
FREQUENCY LIMIT
PFC
CONTROL
PFC driver
SUPREG
Error
amplifier
and clamp
PGND
MAINS RESET,
UNDERVOLTAGE
SENSING
AND CLAMP
+22/17 V
+20 V
+2.5 V
+15 V
BOOST
OVERVOLTAGE
SENSING
BOOST SHORT
SENSING
+0.4 V
+8.0 V
+3.0 V
+2.3 V
+1.6 V
+8.0 V
+5.6 V
+3.2 V
+2.63 V
+10.3 V
+10.9 V
SOFT START
CONTROL
DEMAGNETIZING
SENSING
OVERCURRENT
SENSING
VALLEY
SENSING
BOOST
UNDERVOLTAGE
SENSING
0.1 V
+0.45 V
PROTECTION
AND RESTART
TIMER
OVER-
TEMPERATURE
SENSING
POLARITY
INVERSION
FREQUENCY
CONTROL
TWO SPEED
SOFT START
SWEEP
AND CLAMP
ENABLE
SENSING
PFC/HBC
+2 V
+1 V
+0.5 V
SOFT START
RESET
+1.15 V
SUPIC
START AND
UNDERVOLTAGE
SENSING

TEA1713T/N1,518

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
IC CTLR RESONANT PFC 24SOIC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet