A120
FX4 Series●Stacking Height 5 to 11mm Half Pitch Connector
■Product Specifications
Rating
Current rating 0.5A
Operating Temperature Range -55ç to +85ç
(Note 1)
Storage Temperature Range -10ç to +60ç (Note 2)
Voltage rating
125V AC
Operating Humidity Range 40% to 80%
Storage Humidity Range 40% to 70%
Item Specification Condition
1. Insulation Resistance 100M ohms min. Measured at 250V PC
2. Withstanding Voltage
No flashover or insulation breakdown.
300V AC for 1 minute
3. Resistance 45m ohms max. 100mA
4. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.
Humidity (Steady state)
Contact resistance: 55m ohms max. Insulation resistance: 100M ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle Contact resistance : 55m ohms max. (-55ç: 30 minutes 15 to 35ç: 2 to 3 minutes
Insulation resistance : 100M ohms min. (-85ç: 30 minutes 15 to 35ç: 2 to 3minutes) 5 cycles
7.
Durability (Mating/un-mating)
Contact resistance : 55m ohms max. 300 cycles
8.
Resistance to Soldering heat
No deformation of components affecting performance.
Solder bath: 260ç for 10 seconds
Manual soldering: 360ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
Note : The black dots on the insulater will not affect performance.
■Material
Part Material Finish Remarks
Insulator Polyamide Beige UL94V-0
Receptacle Contact Selective gold plated
________
Header Contact
Phosphor bronze
Selective gold plated
________
■Ordering Information
FX4C 1 - 80 P - 1.27 DSA L
qw tyuer
r Connector Type P : Header
S : Receptacle
t Contact Pitch : 1.27mm
y Contact type DSA : Straight
u L: Board prefixed pin
q Series Name : FX4C
w Product Height Variable:None: Standard 1: +1mm
2: +2mm 3: +3mm
e Number of Contacts: 20, 32, 40, 52, 60, 68, 80
●Dip Type
BApplication Pattern and Stacking Height Combination
●Through hole Type
Receptacle
Header
FX4C -*S FX4C2-*S FX4C3-*S
(Catalog page A124) (Catalog page A125) (Catalog page A126)
578
689
81011
FX4C -
*
P
(Catalog page A121)
FX4C1-
*
P
(Catalog page A122)
FX4C3-
*
P
(Catalog page A123)
Unit: mm
Nov.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.