TMC 60 Series for mounting on 35 mm DIN rail
Overview
The TMC 60 Series provides supplemental overload and
short-circuit protection. An interrupt capacity of 10 kAIC at
480/277 V AC and dual AC/DC ratings make the series ideal
for a wide range of applications.
These DIN rail-mountable circuit breakers are available in one-,
two-, and three-pole confi gurations. An auxiliary contact in S-
or H-function status output is also available. The TMC 60 Series
is UL recognized, CSA approved and carries the CE mark.
Typical Application
Circuit protection for power supplies, UPS, controller I/O points,
relay/contactor coils, control circuits, appliances and motor circuits.
Technical Data
Circuit Breakers
Current Range 0.5 to 63 Amps
Ratings
Standard Voltage Number of Poles
UL 1077, CSA 240/415 V AC 1
415 V AC 2, 3
48 V DC 1
110 V DC 2 (in series)
Trip Characteristics C: 0.5-63A
Rated Wire Sizes - Line/Load
Rigid 35 mm² / 2 AWG min/max
Flexible 25 mm² / 3 AWG min/max
Torque 4.5 Nm / 39.8 lb
f
-in
Vibration
(per IEC 77/16.3) 3 g (in x, y, z direction)
Endurance
Electrical @ V
N,
I
N 10,000
Mechanical 20,000
Plastics Rating per UL 94 V0
Protection Level IP 20
Temperature
Operating -25˚ to +55˚C (-13˚ to +131˚F)
Storage -55˚ to +55˚C (-67˚ to +131˚F)
Configuration 1 pole 2 pole 3 pole
Weight 120 g 240 g 360 g
Thermal Magnetic Circuit Breakers - UL 1077
©2008 PHOENIX CONTACT L002487a:02.08
Dimensions
Note: all measurements in millimeters
