HMC545AETR Datasheet HMC545AE, HMC545AETR, HMC545A | P4-P6

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

SWITCHES - SMT

HMC545A / 545AE

v01.0615

GaAs MMIC SPDT

SWITCH, DC - 3 GHz

Outline Drawing

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS].

3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.

4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.

5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.

Package Information

Part Number Package Body Material Lead Finish MSL Rating Package Marking

HMC545A Low Stress Injection Molded Plastic Sn/Pb Solder

MSL1

[1]

H545A

HMC545AE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn

MSL1

[2]

545AE

[1] Max peak reow temperature of 235 °C

[2] Max peak reow temperature of 260 °C

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

SWITCHES - SMT

HMC545A / 545AE

v01.0615

GaAs MMIC SPDT

SWITCH, DC - 3 GHz

Typical Application Circuit

Notes:

1. Set logic gate Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface.

2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of +3V to +8V applied to the CMOS logic gates.

3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation.

4. Highest RF signal power capability is achieved with Vdd = +8V and A/B set to 0/+8V.

Pin Descriptions

Pin Number Function Description Interface Schematic

1, 3, 5 RF2, RF1, RFC

These pins are DC coupled and matched to 50 Ohms.

Blocking capacitors are required.

2 GND This pin must be connected to RF/DC ground.

4 B See truth and control voltage tables.

6 A See truth and control voltage tables.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

SWITCHES - SMT

HMC545A / 545AE

v01.0615

GaAs MMIC SPDT

SWITCH, DC - 3 GHz

Evaluation PCB

The circuit board used in the application should

be generated with proper RF circuit design tech-

niques. Signal lines at the RF port should have

50 Ohm impedance and the package ground

leads should be connected directly to the ground

plane similar to that shown above. The evalua-

tion circuit board shown above is available from

Hittite Microwave Corporation upon request.

List of Materials for Evaluation PCB EV1HMC545A

[1]

Item Description

J1 - J3 PCB Mount SMA RF Connector

J4 - J6 DC Pin

R1 - R2 1K Ohm resistor, 0402 Pkg.

C1 - C3 330 pF capacitor, 0402 Pkg.

U1 HMC545A / HMC545AE SPDT Switch

PCB

[2]

101659 Evaluation PCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

P1-P3 P4-P6

HMC545AETR

Mfr. #:

Buy HMC545AETR

Manufacturer:

Analog Devices Inc.

Description:

RF Switch ICs GaAs MMIC SPDT Switch DC - 3 GHz

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

HMC545AETR

HMC545AETR

Products related to this Datasheet