3.5-5-4991 Datasheet 3.5-5-4991, 3.5-5-4936, 3.5-5-4941 | P4-P6

- 4 -

90° Peel Adhesion - Based on ASTM D3330 -To stainless steel, room temperature, jaw speed 12 in/min (304.8 mm/min). Average force to remove is measured.

72 hour dwell.

Normal Tensile (T-Block Tensile) - ASTM D-897 - To aluminum, room temperature, 1 in

(6.45 cm

), jaw speed 2 in/min (50.8 mm/min) Peak force to separate is

measured. 72 hour dwell.

Dynamic Overlap Shear - ASTM D-1002 - To stainless steel, room temperature, 1 in

(6.45 cm

), jaw speed 0.5 in/min (12.7 mm/min) Peak force to separate is

measured. 72 hour dwell.

XXXX

Typical Performance

Characteristics

Note: The following technical information and data should be considered representative or

typical only and should not be used for specification purposes.

Product Thickness

Family Number Color Inches

3M™ VHB™ Tapes Dynamic Adhesion Performance

90° Peel Adhesion

lb/in N/cm

Normal Tensile

lb/in

kPa

Dynamic Overlap Shear

lb/in

kPa

4919F Black 0.025 17 (30) 90 (620) 80 (550)

4926 Gray 0.015 14 (25) 95 (660) 90 (620)

4936(F) Gray 0.025 17 (30) 90 (620) 80 (550)

4941(F) Gray 0.045 22 (39) 85 (590) 70 (480)

4947F Black 0.045 22 (39) 85 (590) 70 (480)

4956(F) Gray 0.062 22 (39) 80 (550) 70 (480)

4979F Black 0.062 22 (39) 80 (550) 70 (480)

4991 Gray 0.090 22 (39) 70 (480) 65 (450)

4991B Black 0.090 22 (39) 70 (480) 65 (450)

4941

5906 Black 0.006 9 (16) 100 (690) 100 (690)

5907 Black 0.008 10 (18) 100 (690) 100 (690)

5908 Black 0.010 12 (21) 100 (690) 100 (690)

5909 Black 0.012 12 (21) 100 (690) 100 (690)

5915(P) Black 0.016 14 (25) 90 (620) 90 (620)

5915WF White 0.016 14 (25) 90 (620) 90 (620)

5925(P) Black 0.025 17 (30) 90 (620) 90 (620)

5925WF White 0.025 17 (30) 90 (620) 90 (620)

5930(P) White 0.032 19 (33) 90 (620) 85 (590)

5930WF Black 0.032 19 (33) 90 (620) 85 (590)

5952(P) Black 0.045 22 (39) 90 (620) 80 (550)

5952WF White 0.045 22 (39) 90 (620) 80 (550)

5958FR Black 0.040 20 (35) 100 (690) 100 (690)

5962(P) Black 0.062 22 (39) 90 (620) 80 (550)

5962WF White 0.062 22 (39) 90 (620) 80 (550)

5952

RP16(F) Gray 0.016 12 (21) 95 (660) 90 (620)

RP25(F) Gray 0.025 17 (30) 90 (620) 80 (550)

RP32(F) Gray 0.032 18 (32) 85 (590) 75 (520)

RP45(F) Gray 0.045 20 (35) 85 (590) 70 (480)

RP62(F) Gray 0.062 20 (35) 80 (550) 70 (480)

™

VHB

™

Tapes

- 5 -

Static Shear - ASTM D3654 - To stainless steel, tested at various temperatures and gram loadings. 0.5 in

(3.23 cm

). Will hold listed weight for 10,000 minutes

(approximately 7 days). Conversion: 1500 g/0.5 in

equals 6.6 lb/in

; 500 g/0.5 in

= 2.2 lb/in

Short Term Temperature Tolerance - No change in room temperature dynamic shear properties following 4 hours conditioning at indicated temperature with

100 g/static load. (Represents minutes, hours in a process type temperature exposure).

Long Term Temperature Tolerance - Maximum temperature where tape supports at least 250 g load per 0.5 in

in static shear for 10,000 minutes. (Represents

continuous exposure for days or weeks).

Typical Performance

Characteristics

Note: The following technical information and data should be considered representative or

typical only and should not be used for specification purposes.

Temperature Tolerance

72°F 150°F 200°F 250°F

(22°C) (66°C) (93°C) (121°C)

Short Term

(Minutes, Hours)

°F (°C)

Long Term

(Days, Weeks)

°F (°C)

Static Shear

Product Thickness

Family Number Color Inches

3M™ VHB™ Tapes

4919F Black 0.025 1000 500 500 300 (149) 200 (93)

4926 Gray 0.015 1000 500 500 300 (149) 200 (93)

4936(F) Gray 0.025 1000 500 500 300 (149) 200 (93)

4941(F) Gray 0.045 1000 500 500 300 (149) 200 (93)

4947F Black 0.045 1000 500 500 300 (149) 200 (93

4956(F) Gray 0.062 1000 500 500 300 (149) 200 (93)

4979F Black 0.062 1000 500 500 300 (149) 200 (93)

4991 Gray 0.090 1000 500 500 250 (121) 200 (93)

4991B Black 0.090 1000 500 500 250 (121) 200 (93)

4941

5906 Black 0.006 1000 500 500 250 300 (149) 250 (121)

5907 Black 0.008 1000 500 500 250 300 (149) 250 (121)

5908 Black 0.010 1000 500 500 250 300 (149) 250 (121)

5909 Black 0.012 1000 500 500 250 300 (149) 250 (121)

5915(P) Black 0.016 1000 500 500 250 300 (149) 250 (121)

5915WF White 0.016 1000 500 500 250 300 (149) 250 (121)

5925(P) Black 0.025 1000 500 500 250 300 (149) 250 (121)

5925WF Black 0.032 1000 500 500 250 300 (149) 250 (121)

5930(P) Black 0.032 1000 500 500 250 300 (149) 250 (121)

5930WF White 0.032 1000 500 500 250 300 (149) 250 (121)

5952(P) Black 0.045 1000 500 500 250 300 (149) 250 (121)

5952WF White 0.045 1000 500 500 250 300 (149) 250 (121)

5958FR Black 0.040 1000 350 250 300 (149) 200 (93)

5962(P) Black 0.062 1000 500 500 250 300 (149) 250 (121)

5962WF White 0.062 1000 500 500 250 300 (149) 250 (121)

5952

RP16(F) Gray 0.016 1000 500 500 250 (121) 200 (93)

RP25(F) Gray 0.025 1000 500 500 250 (121) 200 (93)

RP32(F) Gray 0.032 1000 500 500 250 (121) 200 (93)

RP45(F) Gray 0.045 1000 500 500 250 (121) 200 (93)

RP62(F) Gray 0.062 1000 500 500 250 (121) 200 (93)

™

VHB

™

Tapes

- 6 -

Additional Typical Performance Characteristics

Note: The following technical information and data should be considered representative or typical only and should not be used

for specification purposes.

Burn Characteristics 3M™ VHB™ Tape 5958FR

Meets FAR 25.853 (a) 12 second vertical burn, Appendix F, Part I (a)(ii)

Meets NBS Smoking Density (ASTM F814/E662)

Meets Toxicity (Draeger Tube ABD0031, AITM 3.0005)

Dielectric Constant

2.29 2.14 at 1 kHz ASTM D150

1.99 1.95 at 1MHz ASTM D150

Dissipation Factor

0.0245 0.0065 at 1 kHz ASTM D150

0.0374 0.0506 at 1MHz ASTM D150

Dielectric Breakdown Strength 14 (360) 18 (455) V/µm (V/mil) ASTM D140

Thermal Conductivity (k value) 0.08 (0.5) 0.05 (0.4) W/mK (BTU•in/hr•ft

•°F)

Volume Resisitivity 2.1 x 10

2.5 x 10

Ω-cm ASTM D257

Surface Resisitivity 2.7 x 10

>10

Ω/sq ASTM D257

Water Vapor Transmission Rate 25.6 37.1 g/m

•day ASTM F1249 at 38°C/100% RH

Thermal Properties of Modeling

Thermal Coefficient of Expansion 180 (100) 10

-6

m/m/°C (10

-6

in/in/°F)

Shear Modulus (at 25°C, 1 Hz) 3 x 10

3M™ VHB™ Tapes

UL746C Listings - File MH 17478

Category QOQW2 Component - Polymeric Adhesive Systems, Electrical Equipment

3M™ VHB™ Tapes/ Temperature Rating

Product Families

Substrates

Minimum Maximum

Ceramic -35°C 110°C

Aluminum, Galvanized Steel, Stainless -35°C 90°C

Steel, Enameled Steel, Nickel Coated

ABS, Glass (with or without Silane

Coating) PVC, Glass/Epoxy, PBT,

Polycarbonate, Acrylic/Polyurethane

Paint, Polyester Paint

ABS -35°C 75°C

Polycarbonate, Aluminum, Acrylic/ -35° 90°C

Polyurethane Paint, Polyester Paint

4919F, 4926, 4936,

4936F, 4941, 4941F,

4947F, 4956, 4956F,

4979F

Polycarbonate, Primer 94 Coated -35°C 90°C

Polycarbonate, Aluminum, Acrylic/

Polyurethane Paint, Galvanized Steel,

Polyester Paint, Epoxy Paint, Silane

Coated Glass, Uncoated Glass,

Stainless Steel, Enameled Steel,

Glass Epoxy, Polybutylene

Terephthalate, Nylon, Polyphenelene

Ether (PPE), Acrylic

Rigid PVC, ABS -35°C 75°C

Cellulose Acetate Butyrate -35°C 90°C

5915, 5915P, 5915WF

5925, 5925P, 5925WF,

5930, 5030P, 5930WF,

5952, 5952P, 5952WF,

5962, 5962P, 5962WF

5952, 5952P, 5952WF

A current list can be found at www.ul.com (select certifications, search file MH17478)

Aluminum, Silane Coated Glass -35°C 90°C

PVC, ABS -35°C 75°C

Galvanized Steel, Enameled Steel, -35°C 90°C

Nylon, Polycarbonate, Glass Epoxy,

Phenolic, PPE/PS Blend, PBT, Epoxy

Paint, Polyester Paint, Adhesion

Promoter 111 Coated Epoxy Paint,

Promoter 111 Coated Polyester Paint,

Acrylic Urethane Paint, Epoxy/

Polyester Paint

Stainless Steel, Glass, Acrylic -35°C 90°C

PVC, ABS -35°C 75°C

RP16

RP62

3M™ VHB™ Tape

4941 5952

Units

Test Standard

Test Method

• Tape between stainless steel and aluminum foil

• 72 hours dwell at room temperature

• Solvent immersion for 72 hours

• Test within 45 minutes after removing from solvent

• 90° peel angle

• 12 in/min rate of peel

• Peel adhesion compared to control

Note: Continuous submersion in chemical solutions is not recommended. The above information

is presented to show that occasional chemical contact should not be detrimental to tape

performance in most applications in ordinary use.

Water

Salt Water

Hydraulic Fluid

10W30 Motor Oil

Glycol Antifreeze

Kerosene Isopropyl Alcohol

Jet Fuel

Gasoline MEK

Solvent and Fuel Resistance

100

% Adhesive Retention

RP16, RP25, RP32,

RP45, RP62

4991

™

VHB

™

Tapes

P1-P3 P4-P6 P7-P9

3.5-5-4991

Mfr. #:

Buy 3.5-5-4991

Manufacturer:

Description:

3M 4991 VHB(TM) Tape 3.5in x 5yd (1 roll)

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

3.5-5-4991

3.5-5-4991

Products related to this Datasheet