02-2017, Rev. 0217
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
Potter & Brumfield
R10 Series Relay
Contact ratings (continued)
Type Load Cycles
UL 508
P type, Au overlay Ag, bifurcated crossbar contact
2A, 120VAC, resistive 100x10
3
3 A, 120 VAC, resistive 6x10
3
3 A, 30 VDC, resistive 100x10
3
L type, AuPtAg, bifurcated crossbar contact
500mA, 28VDC, resistive 6x10
3
Mechanical endurance 10x10
6
ops., except W type is 1x10
6
ops.
Coil Data
Coil voltage range 3 to 115VDC
4.5mA to 20mA
6 to 115VAC
Coil versions, DC coil
Coil Rated Operate Coil Rated coil
code voltage voltage resistance power
VDC VDC Ω±10% mW
V - standard DC voltage adjustment
1, 2 and 4 pole
V10 3 2.25 10 900
V28 5 3.75 28 900
V52 6 4.5 52 900
V185 12 9 185 900
V700 24 18 700 900
V2.5K 48 36 2500 900
V5.8K 72 54 5800 900
V15.0K 115 86 15000 900
6 pole
V6 3 2.25 6 1,500
V16 5 3.75 16 1,600
V25 6 4.5 25 1,500
V90 12 9 90 1,600
V430 24 18 430 1,400
V1.5K 48 36 1500 1,600
V3.5K 72 54 3500 1,500
V9.0K 115 86 9000 1,500
8 pole
V5 3 2.25 5 1,800
V14 5 3.75 14 1,800
V20 6 4.5 20 1,800
V72 12 9 72 2,000
V350 24 18 350 1,700
V1.25K 48 36 1250 1,900
V2.8K 72 54 2800 1,900
V8.0K 115 86 8000 1,700
All figures are given for coil without preenergization, at ambient temperature +23°C.
n
1 through 8 form C (CO) contact arrangement
n
Broad range of coil options provides sensitivity ranging from 25 to
750mW
n
Various contacts switch from dry circuit to 7.5 amps
n
Many mounting and termination options
Typical applications
Coin changers, audio equipment, elevators, traffic controls, ultrasonic test
equipment, parking toll readers.
Approvals
UL E29244; CSA LR15734
Technical data of approved types on request.
Contact Data
Contact arrangement 1, 2, 3, 4, 6 and 8 form C (CO)
Rated voltage 120VAC
Rated current 7.5A
Contact material Ag, AgCdO, Au overlay Ag, AuPtAg
Contact style Single or bifurcated crossbar
Min. recommended contact load
W type, AgCdO, single contact 300mA, 12VDC
X type, AgCdO, single contact 300mA, 12VDC
M type, AgCdO, bifurcated contact 300mA, 12VDC
Y type, Ag, single contact 100mA, 12VDC
Z type, Ag, bifurcated crossbar 1mA, 12VDC
P type, Au overlay Ag, bifurcated crossbar dry circuit
L type, AuPtAg, bifurcated crossbar dry circuit
Initial contact resistance
All AgCdO contact types 100mΩ
All other contact materials and types 50mΩ
Frequency of operation 360 ops./hr
Contact ratings
Type Load Cycles
UL 508
W type, AgCdO, single contact
7.5A, 120VAC, resistive
7.5A, 28VDC, resistive
1/8HP, 120VAC, same polarity
1/6HP, 240VAC, same polarity
X type, AgCdO, single contact
2A, 30VDC, resistive 100x10
3
5A, 120VAC, resistive 6x10
3
5A, 30VDC, resistive 100x10
3
1/20HP, 120VAC, same polarity
1/10HP, 240VAC, same polarity
M type, AgCdO, bifurcated contact
5A, 120VAC, resistive 6x10
3
5A, 28VDC, resistive 6x10
3
Y type, Ag, single contact
2A, 120VAC 6x10
3
2A, 28VDC 6x10
3
250VA, 250VAC 30x10
3
125VA, 125VAC 100x10
3
Z type, Ag, bifurcated crossbar contact
3A, 120VAC 6x10
3
3A, 28VDC 6x10
3
2A, 30VDC 100x10
3
R10 R10-R R10S R10-T
Signal
Signal Relays
