OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

R10-E1X2-V28

P1-P3P4-P6
02-2017, Rev. 0217
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
4
Potter & Brumfield
R10 Series Relay (Continued)
Other Data (continued)
Terminal type Solder/plug-in terminals, PCB-THT,
8- or 11-PIN octal type plug
Weight 23 to 40g
Packaging/unit tray/50 pcs., box/350pcs.
Accessories
For details see datasheet Sockets and Accessories, R10 Relays
Product Code Description
Many versions of sockets and clips available.
NOTE: Relays with contact current <50mA are not recommended for use in sockets.
Insulation Data
Initial dielectric strength
between open contacts 500V
rms
between contact and coil 1000V
rms
between adjacent contacts 1000V
rms
Initial insulation resistance
between insulated elements 10GΩ, 500VDC
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -55ºC to 75ºC
Category of environmental protection
IEC 61810 RTI - dust protected and RTIII - wash tight
Terminal dimensions
Solder terminal dimensions Printed circuit terminal dimensions
Terminal assignment
R10 - AC Coil Diagram
Dimensions
.735 MAX.
(18.67)
1.187 MAX.
(30.15)
R10S: 1.50 MAX.
(38.1)
.406
(10.31)
.135
(3.43)
.210
(5.33)
3-48 THREAD
NIB .091 DIA.
x .020 HIGH
(2.31) (.51)
}
TYPE E1 ONLY
.354
(8.99)
#6-32
THREAD
.375
(9.53)
.171
(4.43)
.156
(3.96)
CASE R ONLY
Recommend tape tab
be removed after
immersion cleaning
and before relay is pu
t
in service. Peel off to
permit proper relay
ventilation.
2 POLE .950 MAX.
(24.13, 2 POLE 1R10)
4 POLE 1.165 MAX.
(29.59, 4 POLE 1R10)
6 POLE 1. 375 MAX.
(34.93)
8 POLE 1. 580 MAX.
(40.13)
.437
(11.10)
.59 REF.
(15.0)
STUD ON NARR OW
SIDE ONLY
CASE E
ONLY
TYPE E6 ONLY
.085 MAX.
(2.16)
TYPE E6 ONLY
.012
(.30)
.040
(1.02)
.090
(2.29)
.080
(2.03)
D
(TO TOP OF CASE)
B
A
C
A B C D Arrang.
Type 2 .131 .050 .064 1.251 Inline
Type 7 .131 .040 .013 1.20 Inline
Type 9 .170 .040 .000 1.187 Staggered
Thickness .012 .012 .012 .013 –––
26 27
14
1 POLE
8 9
5
10
6 7
4 3 2 1
2 POLE
8 9 5
10 6 7
4 3 2 1
3 POLE
4 3 2 1
4 POLE
4 3 2 1
14 15 8
16 9 10
11 12 5
13 6 7
14 15 8
16 9 10
11 12 5
13 6 7
6 POLE
4 3 2 1
19 9 10
20 21 11
14 15 5
17 18 8
8 POLE
4 3 2
1
22 12 13
16 6 7
22 9 10
23 24 11
17 18 5
20 21 8
25 12 13
19 6 7
28 15 16
DUAL
COIL
Signal
Signal Relays
02-2017, Rev. 0217
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
5
Potter & Brumfield
R10 Series Relay (Continued)
Product code structure Typical product code R10 -E 1 Y 4 -V700
Type
R10 Cradle-style relay with form C contacts
R10S Super sensitive cradle-style relay with form C contacts
Case style
E Non-sealed polycarbonate dust cover (RTI)
R Wash-tight (RTIII), tape sealed plastic case
1)
T Octal style base on non-sealed polycarbonate dust cover (terminal types 1 & 2 only; 1, 2 & 3 poles only)
1) R10 type only, terminal code 2 or 9 only, no ground or stud
Terminal and mounting
1 Solder/Plug-in terminals with #3-48 mounting stud on R10-E; 8-pin octal type on R10-T
2 PCB terminals (std.) 1.62mm (.064in) clearance, 31.75mm (1.25in) seated ht.; 11-pin octal type on R10-T
6 Side mounting plate with #6-32 stud, solder/plug-in terminals (#3-48 stud not included)
7 Narrow 1.02mm (.04in) PCB terminals, .33mm (.013in) clearance, 30.48mm (1.2in) seated ht.
9 Non-shouldered, narrow 1.02mm (.04in) PCB terminals in staggered arrangement
2)
2) Available only on 1 through 6 pole models
Contact style and rating
3)
W Single contact rated 7.5A max, 300mA min.
4) 5)
X Single contact rated 5A max, 300mA min.
5) 6)
M Bifurcated contact rated 5A max, 300 mA min.
5) 6)
Y Single contact rated 2A typ, 3A max, 100mA min.
Z Bifurcated low level contacts rated 100mA typ, 2A max, 1mA min.
P Bifurcated crossbar dry circuit contacts rated 1mA typ, 3A max, dry circuit min.
L Bifurcated crossbar dry circuit contacts rated 500 microA typ, 250 mA max, dry circuit min.
3) Ratings are at 28VDCV or 115VAC. Total load must not exceed 30A per relay.
4) Use ungrounded frame for AC load of ≥5A. Max ratings are 7.5A at 115VAC and 4A at 28VDC for coil codes S & J
5) Only available on R10 type, only available with coil adjustment code V, Q, S and J.
6) Use ungrounded frame for AC load of ≥5A. Max ratings are 5A at 115VAC and 3A at 28VDC for coil codes S & J
Number of poles
1 1 pole 4 4 pole (not available on R10-T)
2 2 pole 6 6 pole (not available on R10-T)
7)
3 3 pole 8 8 pole (not available on R10-T)
8)
7) Not available with contact code W
8) Only available with case style E, not available with contact code W
Coil voltage
Coil code: please refer to coil versions table
AC voltage Specify coil code consisting of nominal coil voltage followed by W (example: 24V)
DC voltage Specify coil code consisting of coil adjustment code letter followed by coil resistance (example: V700)
PCB layout Suggested panel cutout for relay Mounting hole layout for
Bottom view on solder pins terminal & mounting style 6
Terminal Types E2 & R2 Terminal Types E9 & R9
(Omit unnecessary holes) (Omit unnecessary holes)
.210
(5.33)
.320
.13)
.110
(2.79)
.450
(11.43)
.550
(13.97)
.420
(10.67)
.530
(13.46)
.400
(10.16)
.630
(16.00)
.740
HOLES
+ .004
- .000
+ .10
DIA.
.056
1.42
.500
(12.70)
.100
(2.54)
GRID
.500
(12.70)
.450
(11.43)
6
POLE
2
POLE
4
POLE
.150
(3.81)
.100
(2.54)
+ .004
- .000
+ .10
- .00
( )
.056
1.42
HOLES
DIA.
.281 ± .01
5
(7.14 ±
.38)
.140
(3.56)
X
.354
(8.99)
.281
(7.14)
+ .005
– .000
+ .13
– .00
.109
2.77
2 HOLES
DIA.
( )
.656 ± .015
(1
6.66 ± .38)
2 POLE – .343 ± .020
(8.71 ± .51)
4 POLE – .562 ± .020
(14.27 ± .51)
6 POLE – .781 ± .020
(19.84 ± .51)
8 POLE – 1.000 ± .020
(25.40 ± .51)
X =
TOLERANCE:
± .010
(± .25)
.437
(11.10)
.187 ± .0 02 DIA.
(4.75 ± .05)
.147 ± .0 02 DI
A.
(3.73 ± .05)
Signal
Signal Relays
02-2017, Rev. 0217
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
6
Potter & Brumfield
R10 Series Relay (Continued)
Product Code Arrangement Material Contact Style/Rating Nom. Coil V Terminals & Mounting Part Number
R10-E1P2-115V 2 form C, 2 CO Au overlay Ag Bif crossbar / dry circuit 115 VAC Solder/plug-in w/ #3-48 mounting stud 7-1393765-0
R10-E1P2-V700 24 VDC 6-1393765-9
R10-E1P4-115V 4 form C, 4 CO 115 VAC 7-1393765-6
R10-E1P4-V700 24 VDC 7-1393765-5
R10-E1W2-V185 2 form C, 2 CO AgCdO Single contact / 7.5A 12 VDC 8-1393765-9
R10-E1W2-V700 24 VDC 9-1393765-1
R10-E1W4-V185 4 form C, 4 CO 12 VDC 9-1393765-3
R10-E1W4-V700 24 VDC 9-1393765-5
R10-E1X2-24V 2 form C, 2 CO Single contact / 5A 24 VAC 1-1393766-1
R10-E1X2-115V 115 VAC 1-1393766-0
R10-E1X2-S800 12 VDC 1393766-3
R10-E1X2-V185 1393766-5
R10-E1X2-V700 24 VDC 1393766-9
R10-E1X4-115V 4 form C, 4 CO 115 VAC 1-1393766-8
R10-E1X4-V185 12 VDC 1-1393766-4
R10-E1X4-V700 24 VDC 1-1393766-7
R10-E1X4-V2.5K 48 VDC 1-1393766-5
R10-E1X6-115V 6 form C, 6 CO 115 VAC 2-1393766-5
R10-E1X6-V90 12 VDC 2-1393766-4
R10-E1X6-V430 24 VDC 2-1393766-2
R10-E1Y2-J1.0K 2 form C, 2 CO Ag Single contact / 2A typical Not applicable 3-1393766-3
R10-E1Y2-J2.5K 3-1393766-4
R10-E1Y2-V185 12 VDC 4-1393766-0
R10-E1Y2-V700 24 VDC 4-1393766-4
R10-E1Y2-V2.5K 48 VDC 4-1393766-1
R10-E1Y2-V15.0K 115 VDC 3-1393766-9
R10-E1Y4-J10.0K 4 form C, 4 CO Not applicable 4-1393766-9
R10-E1Y4-V52 6 VDC 5-1393766-6
R10-E1Y4-V2.5K 48 VDC 5-1393766-5
R10-E1Y4-V700 24 VDC 5-1393766-7
R10-E1Y6-V430 6 form C, 6 CO 6-1393766-1
R10-E1Y6-V1.5K 48 VDC 6-1393766-0
R10-E1Z2-V185 2 form C, 2 CO Bifurcated / 100mA typical 12 VDC 7-1393766-2
R10-E1Z2-V700 24 VDC 7-1393766-4
R10-E1Z4-V185 4 form C, 4 CO 12 VDC 7-1393766-9
R10-E1Z4-V700 24 VDC 8-1393766-1
R10-E1Z4-V2.5K 48 VDC 8-1393766-0
R10-E1Z6-V430 6 form C, 6 CO 24 VDC 8-1393766-6
R10-E1Z6-V1.5K 48 VDC 8-1393766-5
R10-T1P2-115V 2 form C, 2 CO Au overlay Ag Bif crossbar / dry circuit 115 VAC 2-1393769-8
R10S-E1Y1-J1.0K 1 form C, 1 CO Ag Single contact / 2A typical Not applicable 7-1393769-0
R10S-E1Y2-J5.0K 2 form C, 2 CO 7-1393769-5
R10-E2P4-V185 4 form C, 4 CO Au overlay Ag Bif crossbar / dry circuit 12 VDC PCB, .064" clearance, 1.25" seated ht. 1393767-3
R10-E2P4-V700 24 VDC 1393767-4
R10-E2W2-V185 2 form C, 2 CO AgCdO Single contact / 5A 12 VDC 1393767-7
R10-E2X2-V185 1-1393767-1
R10-E2X2-V700 24 VDC 1-1393767-5
R10-E2X4-V185 4 form C, 4 CO 12 VDC 1-1393767-7
R10-E2X4-V700 24 VDC 1-1393767-8
R10-E2Y2-V185 2 form C, 2 CO Ag Single contact / 2A typical 12 VDC 2-1393767-6
R10-E2Y2-V700 24 VDC 2-1393767-9
R10-E2Y4-V185 4 form C, 4 CO 12 VDC 3-1393767-5
R10-E2Y4-V700 24 VDC 3-1393767-6
R10S-E2Y1-J1.0K 1 form C, 1 CO Not applicable 8-1393769-1
Signal
Signal Relays
P1-P3P4-P6

R10-E1X2-V28

Mfr. #:
Buy R10-E1X2-V28
Manufacturer:
TE Connectivity
Description:
General Purpose Relays DPDT PLG-IN 28 OHM
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet