MP62071
3.3V/5V, Single-Channel 0.8A
Current-Limited Power Distribution Switch
MP62071 Rev. 1.0 www.MonolithicPower.com 1
4/3/2014 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
The Future of Analog IC Technology
DESCRIPTION
The MP62071 Power Distribution Switch
features internal current limiting to prevent
damage to host devices due to faulty load
conditions. The MP62071 operates from a 3.3V
or 5V nominal input voltage and includes a
90m Power MOSFET to handle up to 0.8A
continuous load with a 1.25A typical current
limit. The MP62071 has built-in protection for
both over current and increased thermal stress.
For over-current protection (OCP), the device
will limit the current by going into a constant
current mode.
When continuous output overload condition
exceeds power dissipation of the package, the
thermal protection will shut the part off. The
device will recover once the device temperature
reduces to approx 120°C.
The MP62071 is available in 8-PIN MSOP8E
and SOIC8E package with exposed pad.
FEATURES
• 0.8A Continuous Current
• Accurate Current Limit
• 2.7V to 5.5V Supply Range
• 140uA Quiescent Current
• 90m MOSFET
• Thermal-Shutdown Protection
• Under-Voltage Lockout
• 8ms FLAG Deglitch Time
• No FLAG Glitch During Power Up
• Reverse Current Blocking
• MSOP8E and SOIC8E package
• UL Recognized: E322138
APPLICATIONS
• Notebook PC
• Set-top-box
• Telecom and Network Systems
• PC Card Hot Swap
• USB Power Distribution
All MPS parts are lead-free and adhere to the RoHS directive. For MPS green
status, please visit MPS website under Products, Quality Assurance page.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
OUT
MP62071
SINGLE-CHANNEL
1
2,3
4
5
6,7,8
3.3V/5V Input
To V
BUS
USB Ports
FLAG
IN
GND
EN
UL Recognized Component