2
FH64MA Series
●
0.25mm Pitch, 0.5mm High, Top Contact, Back Flip Super Low Profile FPC Connector
■Product Specifications
Rating
Current rating
0.2A
Operating Temperature Range
-55 to +85°C (Note 1)
Storage Temperature Range
-10 to +50°C (Note 2)
Voltage rating
AC/DC
30Vrms
Operating Humidity Range
Relative humidity 90% RH
or less (no condensation)
Storage Humidity Range
Relative humidity 90% RH
or less (no condensation)
Recommended
FPC SPC
t=0.12±0.02 Gold plated
Items Specifications Conditions
1. Insulation
Resistance
50Mø min 100V DC
2.
Withstanding
Voltage
No flashover or insulation breakdown 90Vrms AC/1min
3. Contact
Resistance
200mø max
*Including FPC conductor resistance
1mA AC
4. Mechanical
Operation
Contact resistance : 200mø max
No damages, cracks and looseness of parts
10 times insertions and extractions.
5. Vibration
Resistance
Contact resistance : 200mø max
No damages, cracks and looseness of parts
Frequency : 10 to 55Hz, half amplitude : 0.75mm,
for 10 cycles in 3 axial directions.
6. Shock
Resistance
No electrical discontinuity of 1µs or longer
Contact resistance : 200mø max
No damages, cracks and looseness of parts
Acceleration : 981m/s
2
, duration 6ms, half-sine wave,
at 3 times in 3 axial directions
7. M oistur e
Resistance in
steady state
Contact resistance : 200mø max
Insulation resistance : 50Mø min
No damages, cracks and looseness of parts
96 hours at 40
ç
and humidity of 90 to 95%
8.
Temperature
Cycles
Contact resistance : 200mø max
Insulation resistance : 50Mø min
No damages, cracks and looseness of parts
Temperature : -55→+15 to +35→+85→+15 to +35
ç
Time : 30 → 2 to 3 → 30 → 2 to 3minutes
5 cycles with above conditions
9.
Resistance to
Soldering Heat
No deformation of case or excessive
looseness of the terminals
Reflow : See recommended temperature profile (page 6)
Manual soldering : 350±10°C, 5seconds
Note 1 : Including temperature rise caused by current fl ow.
Note 2 : The term “storage” refers to the long
-
term storage condition of unused products before PCB mounting.
For no-electrifi cation state after PCB mounting, the operating temperature and humidity are applied.
■Materials / Finish
Parts Material Finish/Color UL Regulation
Insulator
LCP Beige
UL94V-0
PA Black
Contact Phosphor bronze Nickel barrier gold plated
ーーー
Metal fitting Phosphor bronze Pure tin reflow plated
■Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
❺ Terminal Type
SHW…SMT horizontal staggered mounting type
❻ Specifications
None : Regular(5000 pcs/reel)
(99) : 500 pcs/reel
❶ Series Name : FH
❷ Series No. : 64MA
❸ No. of Contacts : 11
❹ Contact Pitch : 0.25mm
FH 64MA − 11S − 0.25 SHW (99)
❹❺❻
Aug.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.