OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

FH64MA-7S-0.25SHW

P1-P3P4-P6P7-P9P10-P12
1
2017.2②
0.25mm Pitch, 0.5mm High, Top Contact, Back Flip Super Low Profile FPC Connector
FH64MA Series
■Features
1. Super low profile, top contact
This top contact connector has a very thin structure with
an overall connector height of 0.5mm. (Fig.1)
2. Space-saving design
A thorough space-saving design on a 0.25mm pitch,
3.15mm depth (Locked status of actuator) produces a
thorough space-saving function. (Fig.1)
3. Smooth FPC insertion
Mating guide on the connector allows for smooth FPC
insertion in spite of the super low profile. (Fig.2)
4. High FPC retention force
The notches on both sides of FPC are held by metal
tabs, generating a high FPC retention force in spite of
the small size. (Fig.3)
5. Easy-to-manufacture FPC in spite of
the narrow pitch
In spite of the narrow pitch of P=0.25mm, similar pull-out
deviation tolerance of P=0.3mm creates the narrow pitch
without increasing the cost. (Fig.4)
6. Detects unmated FPC by means of the
proprietary mechanism.
Correct FPC insertion can be checked with FPC pattern
and mis-insertion can be detected. (Fig.5)
7. Halogen free
*AS defined by IEC 61249-2-21.
Br : 900ppm max, Cl : 900ppm max,
Br+Cl : 1,500ppm max
A thoroughly space-saving design with a super
low profile, a narrow pitch and a narrow depth
Fig.1
Smooth FPC insertion
0.25× (number of pos.-1)+2.2mm
High FPC retention force
General tolerance of FPC
Fig.2
Fig.3
Fig.4
3.15mm
0.5mm
FPC mis-mating detected
Fig.5
Pitch
Pull-out
deviation X
FPC
cost
0.3mm ±
0.07mm
◎
0.25mm ±
0.07mm
◎
0.2mm ±
0.05mm
○
*The FPC cost is an example image.
Pull-out deviation ±Xmm
Metal locking arms
prevents FPC to fall-off!!
Mating guides surely align
FPC in spite of insertion from
the oblique upper direction!
Mating guide
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
Aug.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
2
FH64MA Series
●
0.25mm Pitch, 0.5mm High, Top Contact, Back Flip Super Low Profile FPC Connector
■Product Specifications
Rating
Current rating
0.2A
Operating Temperature Range
-55 to +85°C (Note 1)
Storage Temperature Range
-10 to +50°C (Note 2)
Voltage rating
AC/DC
30Vrms
Operating Humidity Range
Relative humidity 90% RH
or less (no condensation)
Storage Humidity Range
Relative humidity 90% RH
or less (no condensation)
Recommended
FPC SPC
t=0.12±0.02 Gold plated
Items Specifications Conditions
1. Insulation
Resistance
50Mø min 100V DC
2.
Withstanding
Voltage
No flashover or insulation breakdown 90Vrms AC/1min
3. Contact
Resistance
200mø max
*Including FPC conductor resistance
1mA AC
4. Mechanical
Operation
Contact resistance : 200mø max
No damages, cracks and looseness of parts
10 times insertions and extractions.
5. Vibration
Resistance
Contact resistance : 200mø max
No damages, cracks and looseness of parts
Frequency : 10 to 55Hz, half amplitude : 0.75mm,
for 10 cycles in 3 axial directions.
6. Shock
Resistance
No electrical discontinuity of 1µs or longer
Contact resistance : 200mø max
No damages, cracks and looseness of parts
Acceleration : 981m/s
2
, duration 6ms, half-sine wave,
at 3 times in 3 axial directions
7. M oistur e
Resistance in
steady state
Contact resistance : 200mø max
Insulation resistance : 50Mø min
No damages, cracks and looseness of parts
96 hours at 40
ç
and humidity of 90 to 95%
8.
Temperature
Cycles
Contact resistance : 200mø max
Insulation resistance : 50Mø min
No damages, cracks and looseness of parts
Temperature : -55→+15 to +35→+85→+15 to +35
ç
Time : 30 → 2 to 3 → 30 → 2 to 3minutes
5 cycles with above conditions
9.
Resistance to
Soldering Heat
No deformation of case or excessive
looseness of the terminals
Reflow : See recommended temperature profile (page 6)
Manual soldering : 350±10°C, 5seconds
Note 1 : Including temperature rise caused by current fl ow.
Note 2 : The term “storage” refers to the long
-
term storage condition of unused products before PCB mounting.
For no-electrifi cation state after PCB mounting, the operating temperature and humidity are applied.
■Materials / Finish
Parts Material Finish/Color UL Regulation
Insulator
LCP Beige
UL94V-0
PA Black
Contact Phosphor bronze Nickel barrier gold plated
ーーー
Metal fitting Phosphor bronze Pure tin reflow plated
■Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
❺ Terminal Type
  SHW…SMT horizontal staggered mounting type
❻ Specifications
None : Regular(5000 pcs/reel)
(99) : 500 pcs/reel
❶ Series Name : FH
❷ Series No. : 64MA
❸ No. of Contacts : 11
❹ Contact Pitch : 0.25mm
FH 64MA − 11S − 0.25 SHW (99)
❹❺❻
Aug.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
3
FH64MA Series
●
0.25mm Pitch, 0.5mm High, Top Contact, Back Flip Super Low Profile FPC Connector
■Connector Dimensions
Units : mm
Part No. HRS No. No. of Contacts A B C D E
FH64MA-7S-0.25SHW(**) 580-4610-0 ** 7 3.7 2.5 1.5 1 3.23
FH64MA-9S-0.25SHW(**) Under planning (Note 1) 9 4.2 3 2 1.5 3.73
FH64MA-11S-0.25SHW(**) 580-4612-0 ** 11 4.7 3.5 2.5 2 4.23
FH64MA-13S-0.25SHW(**) Under planning (Note 1) 13 5.2 4 3 2.5 4.73
FH64MA-15S-0.25SHW(**) 580-4608-0 ** 15 5.7 4.5 3.5 3 5.23
FH64MA-17S-0.25SHW(**) Under planning (Note 1) 17 6.2 5 4 3.5 5.73
FH64MA-19S-0.25SHW(**) Under developing (Note 1) 19 6.7 5.5 4.5 4 6.23
FH64MA-21S-0.25SHW(**) Under planning (Note 1) 21 7.2 6 5 4.5 6.73
Note 1 : Contact positions without HRS No. are currently under planning and developing.
Please contact hirose for detailed information about product variation.
7
(E)
1.455±0.1(Vacuum pick up area)
(0.12)
(0.1)
(0.1)
D±0.15
C±0.15
A±0.15
B±0.15
(FPC : t=0.12)
(0.07)
0.3±0.1
0.14±0.15
(3.15 : Actuator close)
Contact
point
Contact
point
a
-
a
Contact No.1
Contact No.2
Lot No.
Polarization mark
HRS markCavity No.
No. of contacts
a
2.67±0.1
2.92±0.1
a
0.5±0.1
0.5±0.1
(0.25)
(1.2)
0.5±0.05
0.33±0.1
2.15±0.15
(1.165)
(1)
(0.45)
(90˚
)
(0.18)
Note
1 : The dimension in parentheses are for reference.
2 : Lead co-planarity including reinforced chucking metals shall be 0.1 max.
3 : To be delivered with tape and reel packages.
See the packaging specifications for details.
4 : Note that preventive hole for sink mark or slit could be added for improvement.
5 : The quality remains good, even with the dark spots, which could occasionally occur on molded plastic.
6 : This product satisfies halogen free requirements defined as 900ppm maximum chlorine,
900ppm maximum bromine, and 1500ppm maximum total of chlorine and bromine.
7
Shows hook part of the chucking metal.
Aug.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
P1-P3P4-P6P7-P9P10-P12

FH64MA-7S-0.25SHW

Mfr. #:
Buy FH64MA-7S-0.25SHW
Manufacturer:
Hirose Electric
Description:
CONN FPC 0.25MM SMD R/A 7POS
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet