SPECIFICATION CONTROL DRAWING
Tyco Electronics Corporation
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Raychem
TITLE:
DUMMY PLUG FOR
HEXASHIELD ADAPTORS
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
DOCUMENT NO.:
HEX07-AB/-AC
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for their
application.
DOC. ISSUE:
1
DATE:
5-Nov-03
DRAWN BY:
M. FORONDA
CAGE CODE:
06090
REPLACES:
R010433
DCR NUMBER:
D030543
PROD. REV.:
A
SCALE:
None
SIZE:
A
SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check the latest revision.
MATERIAL
1. DUMMY PLUG: Beryllium Copper. Plating: see below.
APPLICATION
1. A Dummy Plug is designed to replace a HET-A-*** ferrule where applicable and is purchased separately from
the
originalHexashield Adaptor assembly.
INSTALLATION
- The Dummy Plug replaces the HET-A-*** as shown in the Installation Procedure RPIP-696-04.
Part Numbering:
HEX07-AB or C
Plating Code:
B: Cadmium Olive DRAB per SAE-AMS-QQ-P-416
C: Electroless Nickel per SAE-AMS-C-26074
HEX Sequential Number
