Technical Data
Automotive Qualified
Data Sheet N0193, Rev. D
China - Germany - Korea - Singapore - United States
http://www.smc-diodes.com - sales@ smc-diodes.com
SMBJ SERIES SURFACE MOUNT
TRANSIENT VOLTAGE SUPPRESSOR
Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25°C per Fig. 2.
2. Mounted on 5.0mm²(0.013mm thick)land areas.
3. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4pulses per minute maximum.
Maximum Ratings and Thermal Characteristics
@T
A
=25°C unless otherwise specified
Peak Pulse Power Dissipation at
T
A
=25°C by 10x1000μs Waveform
(Fig.1)(Note 1), (Note 2)
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 2),(Note 3)
Typical Thermal Resistance Junction to Lead
Typical Thermal Resistance Junction to Ambient
Operating Junction and Storage
Temperature Range
Case: SMB Low Profile Molded Plastic
Terminals: Solder Plated , Solderable per MIL-STD
Polarity: Cathode Band or Cathode Notch
Weight:0.093 grams(approx.)
Glass Passivated Die Construction
600W Peak Pulse Power Dissipation
5.0V- 200V Standoff Voltage
Uni- and Bi-Directional Versions Available
Excellent Clamping Capability
Plastic Case Material has UL Flammability
Classification Rating 94V-O
“-A” is an AEC-Q101 qualified device
All SMC Parts are Traceable to the Wafer Lot
Additional testing can be offered upon request