CUSTOMER DRAWING
TITLE:
SOLDERSLEEVE TERMINATOR WITH
PRE-INSTALLED LEAD
Unless otherwise specified dimensions are in
millimeters.[Inches dimensions are shown in brackets]
DIMENSIONING AND TOLERANCING PER GPS
(ISO STANDARDS)
Raychem
Devices
DOCUMENT NO.:
CWT-XX-W122-5
TOLERANCES:
0.00 ± 0.02 MM
0.0 ± 0.2 MM
0 ± 0.5 MM
ANGLES: ± 0°30’
ROUGHNESS
IN MICRON
Tyco Electronics Corporation reserves
the right to amend this drawing at any
time. Users should evaluate the
suitability of the product for their
application.
REV:
C
DATE:
May 9, 2012
PREPARED BY:
YNGUYEN
CAGE CODE:
06090
ECO NUMBER:
ECO-12-008844
SCALE:
NTS
SIZE:
A
SHEET:
1 of 1
© 2003-2012 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Dimensions Cable Dimensions Product
Description
øA
MIN
øB
MIN
L
MAX
øD
MAX
øE
MIN
øF
MIN
øG
MAX
J
CWT-3-W122-5
2.50
(0.098)
3.00
(0.118)
24.50
(0.965)
3.00
(0.118)
1.50
(0.059)
1.00
(0.040)
2.50
(0.098)
7.00±0.50
(0.276±0.020)
CWT-5-W122-5
4.30
(0.169)
4.80
(0.189)
29.30
(1.154)
4.80
(0.189)
2.00
(0.079)
1.50
(0.059)
4.30
(0.169)
9.00±0.50
(0.354±0.020)
CWT-6-W122-5
6.00
(0.236)
6.70
(0.264)
32.00
(1.260)
6.70
(0.264)
3.30
(0.130)
2.80
(0.110)
6.00
(0.236)
10.00± 0.50
(0.394±0.020)
CWT-7-W122-5
6.40
(0.252)
7.30
(0.287)
32.50
(1.280)
7.30
(0.287)
3.30
(0.130)
2.80
(0.110)
6.40
(0.252)
11.00±1.00
(0.433±0.040)
CWT-9-W122-5
8.70
(0.343)
9.20
(0.362)
35.50
(1.398)
9.20
(0.362)
4.50
(0.177)
4.00
(0.157)
8.70
(0.343)
12.00± 1.00
(0.472±0.040)
CWT-11-W122-5
10.00
(0.394)
11.50
(0.453)
35.50
(1.398)
11.50
(0.453)
4.50
(0.177)
4.00
(0.157)
10.00
(0.394)
13.00±1.00
(0.512±0.040)
CWT-13-W122-5
13.00
(0.512)
15.00
(0.591)
45.50
(1.791)
15.10
(0.594)
7.00
(0.276)
6.50
(0.256)
13.00
(0.512)
17.00±1.00
(0.669±0.040)
MATERIALS
1. INSULATION SLEEVE: Transparent heat-shrinkable radiation cross-linked modified polyolefin.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Cd18 per ANSI/J-STD-006.
FLUX: TYPE ROM1 per ANSI/J-STD-004.
3. MELTABLE SEALING RING: Thermally stabilized thermoplastic.
4. GROUND LEAD: Raychem cross-linked polyethylene wire, AWG22, stranded tin plated copper. Color: green.
APPLICATION
1. These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an
insulation rated for at least +85qC, meeting the dimensional criteria listed in the table above.
2. Temperature range: -55qC to +125qC.
3. When installed properly, these devices will meet the requirements of TE Connectivity/Raychem Specification RT-1404.
4. For installation procedure and application equipment, consult TE Connectivity /Raychem RPIP 824-00.
For best results, prepare
the cable as shown:
