DATASHEET
IEC Inlet Filters FN 380
Versatile Filtered Power Entry Module
Rated currents up to 6 A
Single or dual-fuse holder
Fuses Ø6.3 x 32 mm Ø5 x 20 mm
2-pole rocker switch
General purpose application
Optional medical versions (B type)
Performance indicators
Technical specifications
Maximum continuous operating voltage
250 VAC, 50/60 Hz
Operating frequency
DC to 400 Hz
50 to 400 Hz
Rated currents
2 to 6 A @ 40°C max.
High potential test voltage
P –> PE 2000 VAC for 2 sec (standard types)
P –> PE 2500 VAC for 2 sec (B types)
P –> N 760 VAC for 2 sec
Protection category
IP 40 according to IEC 60529
Temperature range (operation and storage)
-25°C to +85°C (25/85/21)
Design corresponding to
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
Flammability corresponding to
UL 94 V-2 or better
MTBF @ 40°C/230 V (Mil-HB-217F)
550,000 hours
Function
2-pole, dark not illuminated
Marking I - 0
Electrical specifications
Inrush current 51 A
10,000 on-off operations according to ENEC
6,000 on-off operations according to UL 1054, TV 5
Mechanical life
50,000 cycles
Switch ratings
Europe (ENEC)
6 A (4 A), 250 VAC*
USA (UL)
6 A, 125 VAC; 4 A, 250 VAC; 1/10 HP
Canada (CSA)
6 A, 125 VAC; 4 A, 250 VAC; 1/10 HP
Output connections
Blade terminals acc. DIN 46 244-A4.8-0.8 (do not
connect by soldering)
* Value in () relates to the inductive current charge: cos φ=0.65
Approvals
The FN 380 power entry module combines an IEC
inlet, a mains filter with a single or dual fuse holder
and a 2-pole rocker switch. Choosing FN 380 product
line brings you the rapid availability of a standard
filter associated with the necessary safety
acceptances. Standard IEC connector filters are a
practical solution helping you to pass EMI system
approval in a short time. A wide selection on
amperage ratings, fuse options, mounting
possibilities and filters for medical applications are
designed to offer you the desired solution.
Features and benefits
Good conducted attenuation performance, based
on chokes with high saturation resistance and
excellent thermal behavior
Front or snap-in mounting
Single or dual-fuse holder
USA Ø6.3 x 32 mm or EU Ø5 x 20 mm fuses
2-pole rocker switch
Custom-specific versions are available on request
Typical applications
Portable electrical and electronic equipment
Consumer goods
EDP and office equipment
Single-phase power supplies, switch-mode power
supplies
Test and measurement equipment
Medical equipment
Typical electrical schematic
