QSG104
4 Rev. 0.1
To demonstrate the remote locator functionality:
1. In the demonstration application, click [Find Me]. The remote will beep and the lights will flash for a period
of time. There may be a delay between clicking [Find Me] in the application and the remote
acknowledgement due to the polling time of the remote.
To demonstrate voice functionality:
1. In the demonstration application, make sure the Audio Data drop down is set to [Hardware Codec
Settings].
2. On the remote, press and hold the [VOICE] button and speak. Release the [VOICE] button when you are
done.
The remote wireless streams your voice to the USB device, where it is processed and stored as a .WAV
file. All .WAV files on the USB device are listed under Audio Data.
3. To hear your recorded audio as it streamed to the target, in the application check [Play Audio Real Time
Over Speakers].
4. To play a file, click the file in the list and click [Play Selected].
5. To clear all files from the USB device, click [Clear Audio].
2 Custom Application Development
You must be a registered user of the Silicon Labs Technical Support Portal and the EM34x Full-Feature Remote
Evaluation Kit must be registered to obtain support and download the latest Silicon Labs development software and
stacks. Go to www.silabs.com/zrctraining
and follow the instructions to register your kit.
Note: Your software serial number will be in the form xxxx-xxxx-xxxx-xxxx-xxxx and can be found on Hardware
Identification List label.
To download the development software, after you have completed registration and are logged into the Silicon Labs
support page click the Software Releases tab, select [latest EmberZNet Software] from the drop-down menu,
and sort by Release Date.
Download and install the latest version of the following tools. The release notes installed with the EmberZNet stack
software include more detailed installation instructions and required version numbers.
• EmberZNet
• Ember Desktop
• ISA3 Utilities
• IAR Embedded Workbench for ARM (IAR-EWARM), installed through the IAR website
Licenses and support for IAR are provided separately and can be obtained from IAR Systems at
http://www.iar.com
.
An evaluation version of IAR can be downloaded directly at:
ftp://files.iar.com/pub/silabs/EWARM-7301.exe
For more information on developing with the EM34x kits, refer to UG113, EM34x Development Kit User's Guide.
See QSG105, Getting Started with Silicon Labs Wireless Networking Software, for information on how to configure
and compile your own applications. See AN906, RF4CE ZigBee Remote Control Firmware Guide, for details on the
reference designs. These and other useful documents are installed with the EmberZNet software. You can also use
the Silicon Labs Technical Support Portal at www.silabs.com/support
.
