Modular power supplies PS Part number 88950303
Switch mode power supply regulated and protected against overloads and short-circuits, easy to integrate into switchboards and
enclosures
The potentiometer can be used to set the output voltage between 100 and 120 % (24 VDC versions) to compensate for any voltage
drops on the line
The LED continuously signals the presence of voltage at the output and, when flashing, triggering of the self-protection
Broad range of supply voltage
Double insulation
Part numbers
Specifications
Environmental characteristics
IEC/EN 60950
-1
IEC/EN 61000
-6-2
IEC/EN 61000
-6-3
IEC/EN 61204
-3
IEC/EN 60364
-4-41 SELV : Safety Extra Low Voltage
EN 55022 (CISPR22)
Harmonic : IEC / EN 61000
-3-2
Class 2 (Double insulation)
Electrical characteristics
100→240VACsingle-phase (-15 %/+10 %)
50/60 Hz (+4 % / -6 %)
or47→53Hz/57→63Hz
Adjustablefrom100→120%
Peak current on energisation
< 20 A (Except for 88950302 : < 90A during 1 ms)
Regulation of line and load
Immunity from micro power cuts
< 10 ms (100 V AC)
< 150 ms (230 V AC)
Primary switch mode electronic power supplies
Fuse gG 2 A or circuit breaker 2 A curve D for 88950303, 88950304, 88950305, 88950306, 88950307
Fuse gG 3 A or circuit breaker 3 A curve D for 88950302
Input / output 3000 VAC / 50 Hz / 1mn
Mechanical characteristics
On section, 35 x 7, 5 mm and 35 x 15 mm or on panel (2 x Ø4 mm)
Screw terminals connection capacity
Inputconnection2x0,14→2,5mm
2
(AWG 26...AWG 14)
Outputconnection1x0,14→2,5mm
2
(AWG 26...AWG 14)
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
02/11/2015 www.crouzet.com