1
®
FN4899.6
ICL3224E, ICL3226E, ICL3244E
+/-15kV ESD Protected, +3V to +5.5V,
1Microamp, 250kbps, RS-232
Transceivers with Enhanced Automatic
Powerdown
The Intersil ICL32XXE devices are 3.0V to 5.5V powered
RS-232 transmitters/receivers which meet ElA/TIA-232 and
V.28/V.24 specifications, even at V
CC
= 3.0V. Additionally,
they provide
±15kV ESD protection (IEC61000-4-2 Air Gap
and Human Body Model) on transmitter outputs and receiver
inputs (RS-232 pins). Targeted applications are PDAs,
Palmtops, and notebook and laptop computers where the
low operational, and even lower standby, power consumption
is critical. Efficient on-chip charge pumps, coupled with
manual and enhanced automatic powerdown functions,
reduce the standby supply current to a 1µA trickle. Small
footprint packaging, and the use of small, low value
capacitors ensure board space savings as well. Data rates
greater than 250kbps are guaranteed at worst case load
conditions. This family is fully compatible with 3.3V only
systems, mixed 3.3V and 5.0V systems, and 5.0V only
systems.
The ICL3244E is a 3 driver, 5 receiver device that provides a
complete serial port suitable for laptop or notebook
computers. It also includes a noninverting always-active
receiver for “wake-up” capability.
These devices, feature an enhanced automatic
powerdown function which powers down the on-chip power-
supply and driver circuits. This occurs when all receiver and
transmitter inputs detect no signal transitions for a period of
30 seconds. These devices power back up, automatically,
whenever they sense a transition on any transmitter or
receiver input.
Table 1 summarizes the features of the devices represented
by this data sheet, while Application Note AN9863
summarizes the features of each device comprising the
ICL32XXE 3V family.
Features
Pb-Free Plus Anneal Available (RoHS Compliant)
ESD Protection for RS-232 I/O Pins to
±15kV (IEC61000)
Manual and Enhanced Automatic Powerdown Features
Drop in Replacements for MAX3224E, MAX3226E,
MAX3244E
Meets EIA/TIA-232 and V.28/V.24 Specifications at 3V
RS-232 Compatible with V
CC
= 2.7V
Latch-Up Free
On-Chip Voltage Converters Require Only Four External
0.1µF Capacitors
Guaranteed Mouse Driveability (ICL3244E)
“Ready to Transmit” Indicator Output (ICL3224E/26E)
Receiver Hysteresis For Improved Noise Immunity
Guaranteed Minimum Data Rate . . . . . . . . . . . . . 250kbps
Guaranteed Minimum Slew Rate . . . . . . . . . . . . . . . 6V/µs
Wide Power Supply Range. . . . . . . . Single +3V to +5.5V
Low Supply Current in Powerdown State. . . . . . . . . . .1µA
Applications
Any System Requiring RS-232 Communication Ports
- Battery Powered, Hand-Held, and Portable Equipment
- Laptop Computers, Notebooks, Palmtops
- Modems, Printers and other Peripherals
- Digital Cameras
- Cellular/Mobile Phones
Related Literature
Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
TABLE 1. SUMMARY OF FEATURES
PART
NUMBER
NO. OF
Tx.
NO. OF
Rx.
NO. OF
MONITOR Rx.
(R
OUTB
)
DATA
RATE
(kbps)
Rx. ENABLE
FUNCTION?
READY
OUTPUT?
MANUAL
POWER-
DOWN?
ENHANCED
AUTOMATIC
POWERDOWN
FUNCTION?
ICL3224E 2 2 0 250 No Yes Yes Yes
ICL3226E 1 1 0 250 No Yes Yes Yes
ICL3244E 3 5 1 250 No No Yes Yes
Data Sheet February 27, 2006
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2000, 2001, 2003-2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
2
Ordering Information
PART NO. PART MARKING TEMP. RANGE (°C) PACKAGE PKG. DWG. #
ICL3224ECAZ (Note) 3224ECAZ 0 to 70 20 Ld SSOP (Pb-free) M20.209
ICL3224ECAZ-T (Note) 3224ECAZ 0 to 70 20 Ld SSOP Tape and Reel (Pb-free) M20.209
ICL3224EIA ICL3224EIA -40 to 85 20 Ld SSOP M20.209
ICL3224EIA-T ICL3224EIA -40 to 85 20 Ld SSOP Tape and Reel M20.209
ICL3224EIAZ (Note) 3224EIAZ -40 to 85 20 Ld SSOP (Pb-free) M20.209
ICL3224EIAZ-T (Note) 3224EIAZ -40 to 85 20 Ld SSOP Tape and Reel (Pb-free) M20.209
ICL3226ECA ICL3226ECA 0 to 70 16 Ld SSOP M16.209
ICL3226ECA-T ICL3226ECA 0 to 70 16 Ld SSOP Tape and Reel M16.209
ICL3226ECAZ (Note) 3226ECAZ 0 to 70 16 Ld SSOP (Pb-free) M16.209
ICL3226ECAZ-T 3226ECAZ 0 to 70 16 Ld SSOP Tape and Reel (Pb-free) M16.209
ICL3226EIA ICL3226EIA -40 to 85 16 Ld SSOP M16.209
ICL3226EIA-T ICL3226EIA -40 to 85 16 Ld SSOP Tape and Reel M16.209
ICL3226EIAZ 3226EIAZ -40 to 85 16 Ld SSOP (Pb-free) M16.209
ICL3226EIAZ-T 3226EIAZ -40 to 85 16 Ld SSOP Tape and Reel (Pb-free) M16.209
ICL3244ECA ICL3244ECA 0 to 70 28 Ld SSOP M28.209
ICL3244ECA-T ICL3244ECA 0 to 70 28 Ld SSOP Tape and Reel M28.209
ICL3244ECAZ (Note) ICL3244ECAZ 0 to 70 28 Ld SSOP (Pb-free) M28.209
ICL3244ECAZ-T (Note) ICL3244ECAZ 0 to 70 28 Ld SSOP Tape and Reel (Pb-free) M28.209
ICL3244EIA ICL3244EIA -40 to 85 28 Ld SSOP M28.209
ICL3244EIA-T ICL3244EIA -40 to 85 28 Ld SSOP Tape and Reel M28.209
ICL3244EIAZ (Note) ICL3244EIAZ -40 to 85 28 Ld SSOP (Pb-free) M28.209
ICL3244EIAZ-T (Note) ICL3244EIAZ -40 to 85 28 Ld SSOP Tape and Reel (Pb-free) M28.209
ICL3244EIB ICL3244EIB -40 to 85 28 Ld SOIC M28.3
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Pinouts
ICL3224E (SSOP)
TOP VIEW
ICL3226E (SSOP)
TOP VIEW
READY
C1+
V+
C1-
C2+
C2-
V-
T2
OUT
R2
IN
FORCEOFF
GND
T1
OUT
R1
IN
R1
OUT
T1
IN
INVALID
V
CC
FORCEON
T2
IN
20
19
18
17
16
15
14
13
12
11
1
2
3
4
5
6
7
8
9
10
R2
OUT
READY
C1+
V+
C1-
C2+
C2-
V-
R1
IN
FORCEOFF
GND
T1
OUT
FORCEON
T1
IN
R1
OUT
V
CC
INVALID
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
ICL3224E, ICL3226E, ICL3244E
3
ICL3244E (SOIC, SSOP)
TOP VIEW
Pinouts (Continued)
C2+
C2-
V-
R1
IN
R2
IN
R3
IN
R4
IN
R5
IN
T1
OUT
T3
OUT
T3
IN
T2
IN
T1
IN
C1+
V
CC
GND
C1-
FORCEON
INVALID
R1
OUT
R2
OUT
R3
OUT
R4
OUT
R5
OUT
V+
FORCEOFF
R2
OUTB
28
27
26
25
24
23
22
21
20
19
18
17
16
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
T2
OUT
Pin Descriptions
PIN FUNCTION
V
CC
System power supply input (3.0V to 5.5V).
V+ Internally generated positive transmitter supply (+5.5V).
V- Internally generated negative transmitter supply (-5.5V).
GND Ground connection.
C1+ External capacitor (voltage doubler) is connected to this lead.
C1- External capacitor (voltage doubler) is connected to this lead.
C2+ External capacitor (voltage inverter) is connected to this lead.
C2- External capacitor (voltage inverter) is connected to this lead.
T
IN
TTL/CMOS compatible transmitter Inputs.
T
OUT
±15kV ESD Protected, RS-232 level (nominally ±5.5V) transmitter outputs.
R
IN
±15kV ESD Protected, RS-232 compatible receiver inputs.
R
OUT
TTL/CMOS level receiver outputs.
R
OUTB
TTL/CMOS level, noninverting, always enabled receiver outputs.
INVALID Active low output that indicates if no valid RS-232 levels are present on any receiver input.
READY Active high output that indicates when the ICL32XXE is ready to transmit (i.e., V- -4V)
FORCEOFF
Active low to shut down transmitters and on-chip power supply. This overrides any automatic circuitry and FORCEON (see Table 2).
FORCEON Active high input to override automatic powerdown circuitry thereby keeping transmitters active. (FORCEOFF must be high).
ICL3224E, ICL3226E, ICL3244E

ICL3226EIAZ

Mfr. #:
Manufacturer:
Renesas / Intersil
Description:
RS-232 Interface IC RS232 3V 1D/1R 15KV E-DWN IND
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union