TIM 2 Series, 2 Watt
www.tracopower.com Page 2 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications
Input current no load 9 Vin models: 90 mA typ.
12 Vin models: 45 mA typ.
24 Vin models: 25 mA typ.
48 Vin models: 12 mA typ.
Surge voltage (1 s max.) 9 Vin models: 15 V max.
12 Vin models: 25 V max.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Start-up voltage 9 Vin models: 4.5 VDC (or lower)
12 Vin models: 9.0 VDC (or lower)
24 Vin models: 18 VDC (or lower)
48 Vin models: 36 VDC (or lower)
Startup time 10 ms typ. / 20 ms max.
Under voltage shut down 9 Vin models: 2 - 4 VDC
12 Vin models: 6 - 8 VDC
24 Vin models: 13 - 17 VDC
48 Vin models: 29 - 35 VDC
Input filter capacitor type
Conducted noise – Conducted & Radiated input suppression
EN 55011 limits to IEC/EN 60601-1-2 4th edit.
EN 55032 class A or B
with external components
–
Application note for filter class A/B proposal
www.tracopower.com/overview/tim2
EMC immunity – Generic for Medical equipment IEC/EN 60601-1-2 4th edition
– ESD (electrostatic discharge) EN 61000-4-2, air ±15 kV, contact ±8 kV,
perf. criteria A
– Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A
– Fast transient / surge EN 61000-4-4, ±2 kV, perf. criteria A
(with external input capacitor / diode) EN 61000-4-5, ±1 kV perf. criteria A
9 Vin models: Nippon chemi-con KY 1000 µF / 25 V
TVS - SMAJ18A, 18 V, 400 W
12 & 24 Vin models: Nippon chemi-con KY 470 µF / 50 V
48 Vin models: Nippon chemi-con KY 220 µF / 100 V
– Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A
– Magnetic field immunity EN 61000-4-8
100 A/m, continuous, perf. criteria A
1000 A/m, 1 sec., perf. criteria A
External input fuse required 9 Vin models: 1.0 A (slow blow)
12 Vin models: 0.5 A (slow blow)
24 Vin models: 0.315 A (slow blow)
48 Vin models: 0.16 A (slow blow)
Output Specifications
Voltage set accuracy ±1 % max.
Regulation – Input variation (Vin min. to Vin max.) 0.2 % max.
– Load variation (0 – 100 %) 1 % max.
– Load variation (10 – 90 %) single output: 0.5 % max.
dual output: 0.8 % max.
– Cross regulation dual output: 5.0 % max. (asymmetrical load 25 / 100 %)
Minimum load not required
Ripple and noise (20 MHz Bandwidth) 50 mVp-p typ.
Transient response (25% load step change)
– Recovery time 500 s typ.
Short circuit protection Continuous, automatic recovery