DG2032EDN-T1-GE4

DG2032E
www.vishay.com
Vishay Siliconix
S17-0462-Rev. A, 27-Mar-17
7
Document Number: 78604
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TEST CIRCUITS
Fig. 3 - Charge Injection
Fig. 4 - Off-Isolation
Fig. 5 - Channel Off / On Capacitance
Fig. 6 - Source / Drain Power Down Leakage
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?78604
.
Off
OnOn
IN
ΔV
OUT
V
OUT
Q = ΔV
OUT
x C
L
C
L
= 1 nF
R
gen
V
OUT
COM
V
IN
= 0 - V+
IN
V
gen
GND
V+
V+
IN depends on switch configuration: input polarity
determined by sense of switch.
+
NC or NO
IN
GND
NC or NO
0 V, 2.0 V
10 nF
COM
Off Isolation = 20 log
V
COM
V
NO NC
R
L
Analyzer
V+
V+
COM
NC or NO
f = 1 MHz
IN
COM
GND
0 V, 2.0 V
Meter
HP4192A
Impedance
Analyzer
or Equivalent
10 nF
V+
V+
+
-
5.5 V
A
IN
NC, NO, Sx
V+
V+
GND
COM
+
-
5.5 V
A
IN
NC, NO, Sx
V+
V+
GND
COM
NOTES:
1. All dimensions are in millimeters.
2. N is the total number of terminals.
3. Dimension b applies to metallized terminal and is measured
between 0.25 and 0.30 mm from terminal tip.
4. Coplanarity applies to the exposed heat sink slug as well as the
terminal.
5. The pin #1 identifier may be either a mold or marked feature, it
must be located within the zone iindicated.
3
Terminal Tip
D2
D2/2
4
Exposed Pad
E2/2
E2
3
C0.10
M
A B
4xb
2 x e
BOTTOM VIEW
TOP VIEW
-A-
-B-
E
D
D/2
E/2
C0.25
C0.25
-C-
C0.08
C0.10//
SEATING
PLANE
A3
A1A
4
NX
SIDE VIEW
BB
CC
AA
DD
Pin #1 Identifier
L
e
2 x e
Package Information
Vishay Siliconix
Document Number: 72209
14-Apr-03
www.vishay.com
1
QFN−12 LEAD (3 X 3)
MILLIMETERS INCHES
Dim Min Nom Max Min Nom Max
A
0.80 0.90 1.00 0.032 0.035 0.039
b
0.18 0.23 0.30 0.007 0.009 0.012
D
3.00 BSC 0.118 BSC
D2
1.00 1.15 1.25 0.039 0.045 0.049
E
3.00 BSC 0.118 BSC
E2
1.00 1.15 1.25 0.039 0.045 0.049
e
0.50 BSC 0.02 BSC
L
0.45 0.55 0.65 0.018 0.022 0.026
AA
0.435 0.017
BB
0.435 0.017
CC
0.18 0.007
DD
0.18 0.007
ECN: C-03092—Rev. A, 14-Apr-03
DWG: 5898
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

DG2032EDN-T1-GE4

Mfr. #:
Manufacturer:
Vishay / Siliconix
Description:
Analog Switch ICs 2.5ohm High Band Dual SPDT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet