OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AA3528SESK/J3

P1-P3P4-P6
SPEC NO: DSAM8621 REV NO: V.2A DATE: SEP/23/2013 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1201008528
3.5x2.8mm SURFACE MOUNT LED LAMP
Part Number: AA3528SESK/J3 Hyper Red
Features
z Single color.
z Suitable for all SMT assembly and solder process.
z Available on tape and reel.
z Ideal for backlighting.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
Description
The Hyper Red device is based on light emitting diode chip
made from AlGaInP.
SPEC NO: DSAM8621 REV NO: V.2A DATE: SEP/23/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1201008528
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H
2
S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAM8621 REV NO: V.2A DATE: SEP/23/2013 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1201008528
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
Hyper Red (AlGaInP) Water Clear
1000 1500
120
°
*300 *450
AA3528SESK/J3
Parameter Hyper Red Units
Power dissipation 140 mW
DC Forward Current 50 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 640
nm I
F=20mA
λD [1] Dominant Wavelength Hyper Red 625
nm I
F=20mA
Δλ1/2 Spectral Line Half-width Hyper Red 20
nm I
F=20mA
C Capacitance Hyper Red 27
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Hyper Red 2.2 2.8 V IF=20mA
I
R Reverse Current Hyper Red
10 uA VR=5V
P1-P3P4-P6

AA3528SESK/J3

Mfr. #:
Buy AA3528SESK/J3
Manufacturer:
Kingbright
Description:
Standard LEDs - SMD 3.5 X 2.8 MM RED SMD LED
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet