- Page 6 -
- Page 5 -
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 Back to Index
5
BNC V-Bite ® PC Edge Mount
The V-Bite ® is an industry award winning design PCB connector with all the advantages a designer could want. It edge mounts to the board which
offers the lowest profile and utilizes very little PCB real estate. It lends itself to surface mount and through-hole soldering techniques. There are versions
for IR and convection reflow soldering. Because the connector locks into place both above and below the PCB it disperses rotational torque relief to the
board and not the solder points. The V-Bite ® design offers the lowest VSWR ratings due to the straight through-put contact design. No right angles for
reflection. Available in 50 and 75 ohm, threaded and non-threaded. Other options for PCB thickness available. Other interfaces
available. ( See “F”, BNC Twin and TNC sections.)
Part Number
Description Imp Contact
Fi
.
No.
Dw
.
361V504ER BNC Jack W/ Teflon For Reflow Solder
50
Brass./Gold 39A
361V504ET
BNC Threaded Jack W/ Teflon For Reflow
Solde
50
Brass./Gold 39
361V504EFT BNC Threaded Jack W/ Teflon Insulator/Flange
50
Brass./Gold 39B
361V509E BNC Jack W/ Polyethylene Insulato
50
Brass/Tin 39A
361V509ET BNC Threaded Jack W/ Polyethylene Insulator
50
Brass/Tin 39
---
361V704ER BNC Jack W/ Teflon For Reflow Solde
75
Brass./Gol
39A
361V704ET
BNC Threaded Jack W/ Teflon For Reflow
Solde
75
Brass./Gol
39
361V704EFT
BNC Threaded Jack W/ Teflon Insulator/Flange
75
Brass./Gol
39B
361V709E BNC Jack W/ Polyethylene Insulator
75
Brass/Gold 39A
---
361V709ET BNC Threaded Jack W/ Polyethylene Insulator
75
Brass./Gold 39
---
361KNT Knurled Nut (361 Series) NA --- ---
3M61V704 Mini- BNC Jack W/ Teflon for Reflow Solder
75
Brass./Gold 39C
RoHS compliant reflow or wave solder RoHS compliant wave solder only REQUEST QUOTE REQUEST DRAWING
Low Profile .270 High FMS
Anti Rotational
VSWR 1.15:1
Patented V-Bite® Snaps Into PCB
Surface Mount Center Contact
Pick & Place Version Available
Fi
. 39
Fig.39A
Fi
.39B Fi
. 39C
s
s
BNC Reduced Size PCB Right Angle Mount
The Super Low™ Profile BNC PC jack reduces the amount of board space needed to mount a PC jack. Board clips hold the unit in place for soldering. The smallest, lowest
profile right angle BNC jack available.
The Lo-Deco™ features a four post design that offers greater stability after wave soldering. Also featured is a gold plated contact and nickel plated cast zinc body. Smooth, sleek
and aesthetically pleasing design is tumbled to remove casting lines.
Part Number Description Imp. Contact Fig. No.
Dw
.
364M595M BNC Super Low Profile Jack
50
Phos./Gol
35A
364M595MT BNC Super Low Profile Jack
50
Phos./Gol
35A
364M795M BNC Super Low Profile Jack
75
Phos./Gol
35A
364M795MT BNC Super Low Profile Jack
75
Phos./Gold 35A