SIDC10D120H8X1SA2

SIDC10D120H8
Edited by INFINEON Technologies, L4054C, Rev 2.1, 14.10.2015
Bare Die Product Specifics
Test coverage at wafer level cannot cover all application conditions. Therefore it is recommended to test all
characteristics which are relevant for the application at package level, including RBSOA and SCSOA.
Description
AQL 0.65 for visual inspection according to failure catalogue
Electrostatic Discharge Sensitive Device according to MIL-STD 883
Revision History
Version
Subject (major changes since last revision)
Date
2.0
Final data sheet
30.12.2014
2.1
Editorial changes
14.10.2015
SIDC10D120H8
Edited by INFINEON Technologies, L4054C, Rev 2.1, 14.10.2015
Published by
Infineon Technologies AG
81726 München, Germany
© Infineon Technologies AG 2015.
All Rights Reserved.
IMPORTANT NOTICE
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics (“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated
herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims
any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of
intellectual property rights of any third party.
In addition, any information given in this document is subject to customer’s compliance with its obligations
stated in this document and any applicable legal requirements, norms and standards concerning customer’s
products and any use of the product of Infineon Technologies in customer’s applications.
The data contained in this document is exclusively intended for technically trained staff. It is the responsibility
of customer’s technical departments to evaluate the suitability of the product for the intended application and
the completeness of the product information given in this document with respect to such application.
For further information on the product, technology, delivery terms and conditions and prices please contact
your nearest Infineon Technologies office (www.infineon.com).
Please note that this product is not qualified according to the AEC Q100 or AEC Q101 documents of the
Automotive Electronics Council.
WARNINGS
Due to technical requirements products may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies office.
Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized
representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any
applications where a failure of the product or any consequences of the use thereof can reasonably be
expected to result in personal injury.

SIDC10D120H8X1SA2

Mfr. #:
Manufacturer:
Infineon Technologies
Description:
DIODE GEN PURP 1.2KV 15A WAFER
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet