STEVAL-STLCS02V1 Datasheet STEVAL-STLCS02V1 | P1-P3

March 2017

DocID030392 Rev 1

1/5

For further information contact your local STMicroelectronics sales

office

www.st.com

STEVAL-STLCS02V1

SensorTile connectable sensor node: solder only

Data brief

Features

 Very compact module for motion, audio,

environmental sensing and Bluetooth

low

energy connectivity with a complete set of

firmware examples

 Mobile connectivity via the ST BlueMS app,

available for iOS™ and Android™

 Main components:

 STM32L476 – 32-bit ultra-low-power

MCU with Cortex

M4F

 LSM6DSM – iNEMO inertial module:

3D accelerometer and 3D gyroscope

 LSM303AGR – Ultra-compact high-

performance eCompass module: ultra-

low power 3D accelerometer and 3D

magnetometer

 LPS22HB – MEMS nano pressure

sensor: 260-1260 hPa absolute digital

output barometer

 MP34DT04 – 64 dB SNR digital MEMS

microphone

 BlueNRG-MS – Bluetooth low energy

network processor

 BALF-NRG-01D3 – 50 Ω balun with

integrated harmonic filter

 LD39115J18R – 150 mA low quiescent

current low noise LDO 1.8 V

 2 V - 5.5 V power supply range

 External interfaces: UART, SPI, SAI (Serial

Audio Interface), I²C, DFSDM, USB OTG,

ADC, GPIOs

 Solderable only interface (no connector on

back side)

 SWD interface for debugging and

programming capability

 RoHS compliant

Description

STEVAL-STLCS02V1 (SensorTile) is a highly

integrated reference design that can be plugged

into form-factor prototypes, adding sensing and

connectivity capabilities to new designs through a

smart hub solution. It can also easily support

development of monitoring and tracking

applications like standalone sensor nodes

connected to iOS™ or Android™ smartphone

applications.

The SensorTile occupies a very small 13.5 x 13.5

mm square outline, with all the electronic

components on the top side. The connector

pinout is repeated on 18 PCB pads to render the

SensorTile a solderable system on module.

Refer to user manual UM2101 Getting started

with the STEVAL-STLKT01V1 SensorTile

integrated development platform for more

information.

Regulatory approvals

STEVAL-STLCS02V1

2/5

DocID030392 Rev 1

1 Regulatory approvals

The SensorTile module STEVAL-STLCS02V1 is marketed under the same FCC identifier

(ID: S9NSTILE01) as the SensorTile kit (code STEVAL-STLKT01V1) and the SensorTile

module STEVAL-STLCS01V1 as a class I permissive change. The FCC ID S9NSTILE01 is

a limited modular approval as the module does not have RF shielding. The radio

transmitter was tested for FCC certification in the specific host with model number

STEVAL-STLCX01V1, belonging to the SensorTile kit (code STEVAL-STLKT01V1). When

integrated in a custom designed host, the SensorTile module STEVAL-STLCS02V1 must

be tested and FCC certified in the custom designed host.

The SensorTile module STEVAL-STLCS02V1 is marketed under the same IC certification

number IC: 8976C-STILE01 as a class I permissive change to model number HVIN:

STEVAL-STLCS01V1. Please refer to the data brief of the SensorTile kit (code STEVAL-

STLKT01V1) for complete information on PMN, FVIN and HMN. The SensorTile module is

certified as a limited module because the modular transmitter does not have RF shielding.

The radio transmitter was tested in the representative host with model number STEVAL-

STILECX01V1, belonging to the SensorTile kit (code STEVAL-STLKT01V1). When the

SensorTile module is integrated into a different custom designed host, the developer of the

host shall perform additional radiated emission test and meet technical requirements and

labeling requirements as per RSP100 section 3.2 http://www.ic.gc.ca/eic/site/smt-

gst.nsf/eng/sf01130.html for IC certification.

The Bluetooth radio power output is set by default at 0 dBm. The FCC and IC certifications

refer to this operating value. The power output can be changed up to 8 dBm by

reprogramming the device firmware, but the change of this operating value will require an

update of the FCC and IC certifications, with additional radio emission tests to be

performed.

STEVAL-STLCS02V1

Schematic diagram

DocID030392 Rev 1

3/5

2 Schematic diagram

Figure 1: Functional block diagram

P1-P3 P4-P5

STEVAL-STLCS02V1

Mfr. #:

Buy STEVAL-STLCS02V1

Manufacturer:

STMicroelectronics

Description:

Multiple Function Sensor Development Tools SensorTile connectable sensor node: solder only

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

STEVAL-STLCS02V1