OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AAAF5060QBFSURZGS

P1-P3P4-P6P7-P8
SPEC NO: DSAL0957 REV NO: V.1 DATE: OCT/06/2010 PAGE: 1 OF 8
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1201007061
5.0mm x 6.0mm SURFACE MOUNT LED LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: AAAF5060QBFSURZGS
Blue
Hyper Red
Green
Features
z Chips can be controlled separately.
z Suitable for all SMT assembly and solder process.
z Available on tape and reel.
z Package: 500pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Description
The Blue source color devices are made with InGaN Light
Emitting Diode.
The Hyper Red source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAL0957 REV NO: V.1 DATE: OCT/06/2010 PAGE: 2 OF 8
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1201007061
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter
of the nozzle should be as large as possible.
5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
SPEC NO: DSAL0957 REV NO: V.1 DATE: OCT/06/2010 PAGE: 3 OF 8
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou ERP: 1201007061
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. *Luminous intensity with asterisk is measured at 50mA; Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Within 350mW at all chips are lightened.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 30mA *50mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
AAAF5060QBFSURZGS
Blue (InGaN)
Water Clear
280 400
Hyper Red (AlGaInP) *500 *800
Green (InGaN) 500 1000
100
°
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength
Blue
Hyper Red
Green
461
650
515
nm I
F=20mA
λD [1] Dominant Wavelength
Blue
Hyper Red
Green
465
630
525
nm I
F=20mA
Δλ1/2 Spectral Line Half-width
Blue
Hyper Red
Green
25
27
30
nm I
F=20mA
C Capacitance
Blue
Hyper Red
Green
100
45
45
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage
Blue
Hyper Red
Green
3.3
1.9
3.3
4
2.5
4.1
V IF=20mA
I
R Reverse Current
Blue
Hyper Red
Green
50
10
50
uA VR=5V
Parameter Blue Hyper Red Green Units
Power dissipation[2] 350 mW
DC Forward Current 30 50 30 mA
Peak Forward Current [1] 150 185 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
P1-P3P4-P6P7-P8

AAAF5060QBFSURZGS

Mfr. #:
Buy AAAF5060QBFSURZGS
Manufacturer:
Kingbright
Description:
Standard LEDs - SMD RGB 630/525/465nm 800/1000/400mcd
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet