Logical Block Address Configuration
The drive is set to report the number of logical block addresses (LBA) that will ensure
sufficient storage space for the specified capacity. Standard LBA settings, based on the
IDEMA standard (LBA1-03), are shown below.
Table 2: Standard LBA Settings
Capacity (GB)
Total LBA Max LBA
User Available
Bytes
Decimal Hexadecimal Decimal Hexadecimal (Unformatted)
32 62,533,296 3BA2EEB0 62,533,295 3BA2EAF 32,017,047,552
64 125,045,424 7740AB0 125,045,423 7740AAF 64,023,257,088
128 250,069,680 EE7C2B0 250,069,679 EE7C2AF 128,035,676,160
M500IT 2.5-Inch NAND Flash SLC SSD
Logical Block Address Configuration
CCMTD-731836775-10445
m500it_2_5_SLC_industrial_ssd.pdf - Rev. B 5/17 EN
4
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.